Webinar: 3 Smart Ways to Make Your Swiss Parts 4x Faster
Don’t miss your chance to learn about how to increase Swiss parts’ speeds by joining Production Machining and your colleagues for a free webinar hosted by INDEX Corp.
#basics
Share
Don’t miss your chance to learn about how to increase Swiss parts’ speeds by a joining Production Machining and your colleagues for a free webinar hosted by INDEX Corp.’s Application Engineer Manager Tyler Economan on Wednesday, Sept. 20 at 2 p.m. EDT Register now before it’s too late.
A large percentage of small parts are being produced on sliding headstock CNC lathes simply because that is where manufacturers have capacity. Many of these small parts do not need to be machined in this fashion. output, however, could be increased four to six times and materials costs could be decreased while doing so by running these parts on a CNC multi-spindle lathe.
The webinar topics include:
- CNC multi-spindle machines versus a Swiss CNC
- Alternate ways to produce parts
- The impact productivity has on an overall investment
- How smaller lot sizes can be run with full CNC capability
RELATED CONTENT
-
Predicting Size Change from Heat Treatment
While a precise forecast of a steel part’s size change during heat treating cannot be expected, by considering potential factors, a heat treater can provide a reasonable estimate that can help the shop prepare for final machining operations.
-
7 Causes of Quench Cracking in Steel
Failures of steel parts in service or production occur infrequently. However, when steel parts fail, the consequences are dire. Here are seven ways that steel can fail as a result of quench cracking from heat treatment.
-
Reducing Variation: The Only Way to Reduce Production Cost
Hidden variation in production is what increases costs in manufacturing. Here are four tips for reducing variability.
