High-Speed Grinding Of Small Workpieces

The VG 110 is a production grinder for the machining of large batches of small and very small high-precision workpieces using internal and external cylindrical grinding, out-of-round grinding and the combination process of hard turning and grinding. The grinder provides the user with a  choice to either grind the traditional way or use the combination of turning and grinding on one machine. Sections of the workpiece are soft or hard finish-turned and only finish-ground, in the same setup (and most frequently after having first been pre-turned), as tolerances demand.

Related Suppliers

The VG 110 is a production grinder for the machining of large batches of small and very small high-precision workpieces using internal and external cylindrical grinding, out-of-round grinding and the combination process of hard turning and grinding.

The grinder provides the user with a  choice to either grind the traditional way or use the combination of turning and grinding on one machine. Sections of the workpiece are soft or hard finish-turned and only finish-ground, in the same setup (and most frequently after having first been pre-turned), as tolerances demand. According to the company, this not only improves component quality, but also reduces cycle times. It also limits the wear and tear of grinding wheels and the number of dressing cycles required.

The grinder series is capable of machining diameters from 1 mm to 60 mm; a free clamping length maximum of 125 mm; a machining length maximum of 60 mm.