Mini Toolholders

Schunk Inc. 's Mini toolholders and SVL extensions now have clamping diameters as small as 0. 3 mm (0.

Related Topics:

Related Suppliers

Schunk Inc.'s Mini toolholders and SVL extensions now have clamping diameters as small as 0.3 mm (0.012"). This means that circuit board tools with straight shanks can be held directly in a holder.

The clamping principle of this mini toolholder is based on the elastic forces of material to clamp the tool shank. The clamping process can be done within 30 seconds by means of a clamping device, either the manual device SVP-2 or the automatic clamping device SVP-3 together with corresponding reduction inserts. The runout accuracy and repeatability is less than 3 seconds. Because of the rotational symmetric design, a basic counter balance of less than 4 g/mm is guaranteed.

 

 

Editor Pick

Mega ER Grip Designed to Outperform Standard ER Systems

Big Kaiser’s Mega ER Grip was designed to outperform all standard ER systems in the four most critical areas of tool holder performance: clamping force, concentricity, rigidity and balance at high spindle speeds.