Pump/Skimmers For Individual Sumps

New pump/skimmers for individual machine tool sumps rapidly remove tramp oil and suspended solids from the coolant and aerate the coolant by continuous recirculation at a high flow rate. Three models of the TKO separators are supplied for sumps as large as 500 gallons. The separators use a high flow rate 1/2" air-operated diaphragm pump.

Related Suppliers

New pump/skimmers for individual machine tool sumps rapidly remove tramp oil and suspended solids from the coolant and aerate the coolant by continuous recirculation at a high flow rate. Three models of the TKO separators are supplied for sumps as large as 500 gallons. The separators use a high flow rate 1/2" air-operated diaphragm pump. The skimmer pumps oily coolant from the surface of the sump, separates the chips and tramp oil, and continuously recirculates the coolant at 180 gallons per hour. The high recirculation rate turns over a sump rapidly.

The separators may be run when the machine tool is operating or is idle. The separator contains the Keller permanent coalescing oil separator element that never needs to be serviced or changed and a compact floating inlet device that compensates automatically for changes in the coolant level in the sump.