Quick-Change Tooling

CJWinter offers Quick Change Tooling (QCT), taking change-over of sideworking and endworking tools on the Davenport from hours to minutes. The QCT package eliminates time-consuming adjustments and changing of tools, according to the company. The QCT stationary and revolving spindles are said to make it easier to change endworking tools for a Davenport machine.

CJWinter offers Quick Change Tooling (QCT), taking change-over of sideworking and endworking tools on the Davenport from hours to minutes. The QCT package eliminates time-consuming adjustments and changing of tools, according to the company.

The QCT stationary and revolving spindles are said to make it easier to change endworking tools for a Davenport machine. A one-turn screw-on and screw-off is all it needs.

The QCT full-width adapter plate allows tool changes in minutes. Leave the plates attached to a machine and slide the dovetail QCT form and shave tools on and off. A locking gib is said to allow for a quick change and secure locking of the entire tool and block assembly. Lateral adjustment can be made with the fine pitch set screw.

The QCT dovetail form tool is available in 5- or 10-degree clamp angles. Top bolts maintain the taper even when the block assembly is removed from the adapter plate for changes. The dovetail clamp provides a higher locking capacity to withstand heavy tooling forces in situations such as interrupted cuts. The clamp allows for standard HSS tooling or insert. The taper adjustment screw allows removal of the tool without losing the taper.