S224 Cutting Insert with Through-Tool Coolant

Originally titled 'Cutting Insert with Through-Tool Coolant'

HP65-grade S224 indexable insert with through tool coolant, featuring the 3V geometry and a 3-mm (0.118") grooving width, has a wear-resistant AlTiN coating and is specially designed for grooving and parting off stainless steels.

Related Topics:

Related Suppliers

HP65-grade S224 indexable insert with through tool coolant, featuring the 3V geometry and a 3-mm (0.118") grooving width, has a wear-resistant AlTiN coating and is specially designed for grooving and parting off stainless steels. The cutting insert with a 3-mm (0.118") cutting width and an internal coolant supply expands the areas of application of an existing and strong tooling system.

The coolant jet acts directly on the cutting zone, ensuring optimum cutting conditions. The funnel-shaped nozzle creates a coolant jet, which supports chip forming and thus reduces the chance of chip buildup. This type of internal cooling largely prevents the formation of built-up edges and fractures of the cutting edge. Unlike conventional cooling methods, this system enables higher cutting parameters, which allow the tool to be used more cost effectively.

The square shank holder with internal cooling is available in dimensions of 0.630" × 0.630", 0.787" × 0.787" and 0.984" × 0.984", in a right-hand and left-hand design. Coolant is transferred via a supply port in the bottom of the square shank. The holders are compatible with the relevant VDI supports and allow inserts to be replaced easily with a high level of repeatability and accuracy.

 

Editor Pick

CNC Broaching with a Driven Broach Head

A high-volume OEM for motor shafts switched its keyway broaching process to use the lathe's live tooling capabilities, improving cycle times and reaching the recommended surface feet per minute.