Series For Feeding Small Diameter Bars

The new Genius Series combines mechanical reliability with the flexibility of a CNC control system. The CNC control provides all necessary parameters to configure bar feeding and bar changing operations. This CNC control is now a standard feature on this loader that can feed bars from 1 mm to 20 mm in diameter.

Related Suppliers

The new Genius Series combines mechanical reliability with the flexibility of a CNC control system. The CNC control provides all necessary parameters to configure bar feeding and bar changing operations. This CNC control is now a standard feature on this loader that can feed bars from 1 mm to 20 mm in diameter. This new series has an increased 8.5'' magazine capacity and can now hold 220 1 mm × 12' bars. A double pusher system has been designed to handle these small diameter bars while decreasing the length of the Genius by 4 ft. The headstock synchronization device coupled with the telescopic nose are keys to its supporting peck drilling and threading operations. There are a number of other improvements offered as standard features. The cast iron guide channel allows the rotation of round, hexagon or square bars at high rpm with minimal noise and vibration. The changeover on this new version on the guide channel is even quicker than before. During the bar changing cycle, the Genius automatically retracts the bar remnant for easy off-loading. The company has also included a standardized electrical interface on all bar feeders. Also, the new hand-held digital push-button pendant permits remote control programming, allowing main operations to be done away from the bar feeder at the lathe. All these bar feeders can be configured with several options. The axial track enables the magazine to slide away from the lathe for easy spindle access. The electronic clutch will allow for adjustment of feeding to a suitable value during the feeding cycle.