Wet Blast System Enables Manual, Semi-Automatic Blasting, Rinsing

Guyson Corp. offers the Model SS-10 SA rotary table wet blast system with manual and semi-automatic modes of operation.

Related Topics:

Related Suppliers

Guyson Corp. offers the Model SS-10 SA rotary table wet blast system with manual and semi-automatic modes of operation. It is designed to use abrasive or bead-type media for dustless blast cleaning, descaling, surface preparation and cosmetic finishing of components that may be too damp or oily for dry blast processing. The system includes five wet blast guns, one pistol-grip for optional manual use and four on a horizontal oscillator for semi-automatic use. A mixture of water and media is delivered to the guns from the 50-gallon slurry hopper. The slurry pump uses a 2-speed motor so that the operator can choose a high or low slurry volume depending on the components and the wet blasting process requirements.

In semi-automatic mode, the powered table rotates at controlled and adjustable speed as the blast guns sweep back and forth over the components on the turntable. The stroke and speed of gun oscillation can be adjusted, and multi-adjustable brackets allow the blast angle and stand-off distance of the wet blast guns to be preset as desired for complete coverage. A manual rinse nozzle is provided as standard equipment, but a timed, automated rinse cycle is available as an option.

The 60" × 70" blast cabinet stands 96" tall and is made of a non-corroding composite material. The interior of the wet blasting chamber is lined with sheet rubber for abrasion resistance. A 50" square swing door provides access to the blast enclosure on each side. On the right side, a track extension and transfer cart allows the 49" diameter rotary table to be rolled out for loading and unloading.