Danray Products LLC

• Catalog MS features machine safety shields, safety scales, safety signs and lamps • Includes a new bench grinder safety scale, a new warning sign for safety blocks and a new U-shaped shield • These heavy-duty American-made products comply with applicable OSHA, ANSI and CSA safety standards     .

The danger sign for lathes from Danray Products addresses the main safety hazards created by rotating chucks and workpieces on lathes. This sign is 5" L × 6" H and 0. 002"-thick polyester sign has a high-bond strength acrylic adhesive that is chemical-resistant and has holding strength even at high temperatures (as high as 350°F).

The company’s 5" × 6" safety sign for bench grinders addresses the main safety hazards created by rotating wheels on bench grinders. It also informs operators and employers of the proper work-rest and tongue adjustments for compliance with OSHA 29 CFR 1910. 215, ANSI B11.

When a barrier guard is used for safeguarding on a machine, it must be designed, constructed, applied and adjusted so that people cannot reach over, under, around or through the barrier guard to reach the hazard. However, most barrier guards have openings in them because they are made out of materials such as wire mesh, expanded metal, rods or hairpins. Openings are also needed for feeding and retrieving workpieces.

- Catalog MS features lathe chuck shields, portable chip/coolant shields, snake arm shields, snake lamps, new safety signs and a new guard safety scale - Products comply with applicable OSHA, ANSI and CSA safety standards   .

Danray Products' heavy-duty lathe chuck shields are designed to apply to lathes or other similar machine applications. The 3/16"-thick polycarbonate shields provide a barrier between the chuck and workpiece and the operator. The shields also deflect chips, coolant and other particles.

Danray Products offers snake-arm lamps that will light the point of operation of machines or work areas where additional light is required to help industrial users meet applicable ANSI B11-series safety standards as well as the ANSI/IESNA RP-7-01 standard for lighting requirements. Each lamp uses a 100-W maximum ordinary incandescent light bulb. The snake arms are made of spring steel covered with vinyl to protect them from grease, oil and contaminants that would weaken their holding ability.