Supplier
Hirschmann Engineering USA Inc.
Contact
Hirschmann Engineering USA Inc.
Phone:
847-468-9700
Toll-Free:
866-769-8717
Fax:
847-468-9701
Please visit:
Hirschmann Engineering USA Inc.
Mailing Address:
165 E. Commerce Dr. Ste 104
Schaumburg,
IL
60173
US
A Special Message from Hirschmann Engineering USA Inc.
|
| H9.1613ZSK Self Centering Vise |
Hirschmann Engineering USA
Hirschmann Engineering, USA, Inc. offers this precision self centering vise allowing a cost effective and universal method to quickly clamp different types of work pieces for five sided machining. The vise comes mounted on a pallet and is ready for use in our System 9000 Zero Point reference system for manual or automated loading. Depending on the Zero Point clamper used, it can be quickly and accurately clamped parallel to the machine table or at 45° and 90° indexes. The standard 80mm width reversible jaws allow a wide range of clamping possibilities for part sizes 0 to 190mm in length our width. Optional available jaws include Prism Jaw replacements for holding rounds, Raw Jaws that can be milled to match part geometry and Universal Jaws with additional features. Optional jaws of 125mm width are also available for support of wider work pieces. The vise can easily adapted to hold multiple parts simultaneously by using the optional Twin-load Jaws which come in three different heights. . For automation up to sixteen of the H9.1613ZSK.GP vise can be used in the HIRSCHMANN EROBOT series machine loaders as well as Fanuc 6 axes robots.
Product Categories of Hirschmann Engineering USA Inc.
- Bearings, Pulleys, Clutches, Gears & V-Belts
- Coolants, Cutting Fluids & Oils
- EDM Tooling
- Electrode Materials, EDM Wire, & Supplies
- Fixturing Systems
- Indexers & Rotary Tables
- Pallet Changers - Automatic
- Robots, Industrial
- Tooling Systems, Modular and/or Quick-Change
- Vises & Vise Jaws
- Workholding, Custom
Trade Names
- EROBOT
- HIRSCHMANN
- IONOGRIND
- IONOPLUS
- SINTOCUT
- SINTOGRIND
As seen in PM
Hirschmann Group Takes Over JauchSchmider GmbH & Co. KG
On December 1, 2011, the insolvent JauchSchmider GmbH & Co.
Self-Centering Vise
Hirschmann Engineering USA now has a self-centering vise for use in its System 9000 zero point reference system. This vise allows a cost effective and universal method to quickly clamp different types of workpieces for five-sided machining.
Extended Three-Pin Holder
Hirschmann's 3-Pin holder for use with its Fixturing System 5000 provides quick and positive clamping of long rectangular electrodes or workpieces, according to the company.
This holder offers the ability to precisely and quickly mount electrodes or workpieces using three dowel pins. The slots on the face of the holder are located at the center of the pallet prisms on the rear of the holder.
Fixturing Systems, Presetting Stations And More
-The catalog "Fixturing System 4000 For Wire EDM" contains information about available fixturing systems, presetting stations and automated robotic loading devices from Hirschmann-Features product information about operation, service and maintenance, technical modifications, quality assurance and product warranties- Explains how the fixturing reaches the maximum efficiency of the wire EDM machines using the presetting of workpieces outside the machines.
Vertical Vise For Wire EDM
The company’s newly designed vertical vise, Model H4537 for use with its Fixturing System 4000, provides clamping of one or two independent workpieces in the same setup. Two separate clamping jaws are incorporated in the vise that requires tightening the central screw. No supporting spacers or jackscrews are needed as with Toe clamp-type devices.
