Supplier

PHASE-A-MATIC, INC.

Contact PHASE-A-MATIC, INC.

Phone: 661-947-8485
Toll-Free: 800-962-6976
Fax: 661-947-8764

Please visit: PHASE-A-MATIC, INC.

Mailing Address:
39360 3rd St. E
Ste. 301
Palmdale, CA 93550-3255 US

A Special Message from PHASE-A-MATIC, INC.

PHASE-A-MATIC, INC. has 40 years experience in phase converter systems, including the manufacture and distribution of Static, Rotary, and CNC Phase Converters, with over 3,000 dealers nationwide to serve you.

ROTARY CONVERTER	ROTARY CONVERTER Full rated HP and output Heavily loaded equipment Multi-speed applications Multi-motor applications CNC/PLC w/Voltage Stabilizer Custom designed for efficiency, reliability and proven dependability See MODELS & PRICES See STOCKING DISTRIBUTORS

STATIC CONVERTER	STATIC CONVERTER Runs motor loads only Runs motors at 2/3* rated HP Economical Easy to install and use *Refers to wye-wound motors; delta-wound motors will run at 50% rated HP. See MODELS & PRICES See STOCKING DISTRIBUTORS

VOLTAGE STABILIZER	VOLTAGE STABILIZER Use w/ROTARY CONVERTER for: CNC/PLC equipment Voltage-sensitive equipment Reduces voltage phase imbalance on Rotary Converter systems, helping CNC/PLC & voltage-sensitive equipment operate properly. See MODELS & PRICES See STOCKING DISTRIBUTORS

Product Categories of PHASE-A-MATIC, INC.

Voltage/Current Regulators, Transformers & Phase Converters

Trade Names

PHASE-A-MATIC
ROTARY CONVERTER
STATIC CONVERTER
VOLTAGE STABILIZER

Deep Links

Phase Conversion Products Page - Phase conversion products and brochures in PDF format

Phase Conversion Sizing Forms - Fill out the appropriate form for technical help in finding the right solution for your phase conversion success.

Phase Converter Uses & Applications - See 3-phase machines that are currently being run by Phase-A-Matic, Inc. Phase Converters.

Product Announcements Provided By PHASE-A-MATIC, INC.

CNC Phase Converter

Rotary Phase Converter

Provided By PHASE-A-MATIC, INC.

Reliability, quality and construction of the PHASE-A-MATIC™ Rotary Phase Converter: Baldor Electric/PHASE-A-MATIC™ Design The rotary portion of our converter is custom built to our specifications by Baldor Electric, one of the largest and most trusted motor manufacturers in the world, with warranty stations nationwide and worldwide. It is a true phase converter and not a modified electric motor as most of our competitors use. Many years of testing, changing and developing the converter in conjunction with Baldor’s engineers has produced a very simple and trouble-free converter with extremely low idle current and low noise level. Many of our customers confirm that our rotary converters are the quietest and most trouble-free available. Simplicity of design; uses all soldered connections Keeping the design exceptionally simple reduces the risk of electrical connection failure to almost zero since these are some of the most common causes of failure. We use only soldered connections with no mechanical electrical connections like spade clips, terminals or screws which can vibrate loose or corrode over time. There are no start capacitors, relays or contactors with connections which can come loose or arc and weld the contacts causing failure of the contactor and the start capacitors, and perhaps even the rotary converter or your equipment. Because of this we do not have circuit board failures caused by spikes generated by the magnetic contactors as some of our competitors do. The Rotor The PHASE-A-MATIC™ failure rate is practically zero because the rotors are specifically designed and manufactured for rotary converter use. However, some of our competitors emphasize that rotors often fail. This is because they machine standard electric motors, modifying and thereby weakening standard electric motor rotors, which were not originally designed to be used as a phase converter. Testing before shipment Every converter is performance tested before shipment and assigned a serial number. These records are kept for review if any questions should ever arise about the performance specifications. Warranty Repairs The most likely warranty repair would be bearings or windings, which are very rare. This type of failure is much less than 1%, and if it is going to happen at all, most likely would occur within the first 12 months. Failures after that are extremely rare. See MTBF below. MTBF (Mean Time Between Failure) Failure rate (MTBF) is so low it's almost impossible to determine. We find that within the first 12 months approximately 1 in 150 might have a problem, and usually within a few weeks or months. After the first 12 months, it might be one or less in 5,000 over a 30 year period. We continue to hear of our Rotary Converters that have been in service for 25 or 30 years, and which are still working flawlessly. It could go on to do another 25 or 30 years. There is very little to go wrong with the Rotary Converter.

Static Phase Converter

Voltage Stabilizer

As seen in PM

CNC PAC Phase Converter
The CNC PAC from Phase-A-Matic provides the balanced voltages necessary for reliable operation of CNC/PLC machines, including AC/DC motor drives or any voltage-sensitive three-phase equipment operating from a single-phase power source.