NEW PRODUCTS

This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

PUBLISHED: 7/22/2018

M2 2D Processor Applies Tolerances

Mitutoyo America Corp.’s M2 2D data processing unit has geometric tolerancing that measures features and sets nominals and can apply tolerances and view deviation results.


PUBLISHED: 7/21/2018

Thread Turning Toolholder Directs Coolant Flow

Carmex’s X-treme Jet external thread turning toolholder provides two connecting options via an elbow fitting and top clamp to direct the coolant flow to the cutting edge.


PUBLISHED: 7/20/2018

How to Simplify Your Tooling Inventory with Indexable Slitting Inserts

Narrowest indexable slitting line eliminates the need for regrinding and also reduces the number of required setups, thus simplifying your tooling inventory.


PUBLISHED: 7/20/2018

Jacobs Taper Rigid ER Collet Chucks Provide Quick Change

T.M. Smith Tool’s Jacobs Taper rigid ER collet chucks are designed to be better than keyed and keyless drill chucks in concentricity and holding power.


PUBLISHED: 7/19/2018

3/8” Super Air Wipe Dries, Cools and Cleans Small Diameters

Exair’s 3/8” Super Air Wipe has a split design that can be clamped around continuously moving material such as wire, cable, pipe, hose and extruded shapes.


PUBLISHED: 7/18/2018

Dyna Contact Gage Inspects Machine Spindle Tapers

Big Kaiser’s Dyna Contact precise ceramic taper gage is used to check the geometric accuracy of a machine spindle taper by visually comparing the contact of the gage to the spindle.


PUBLISHED: 7/17/2018

Masterall 1300 Coolant Used in High Pressure Applications

Etna Products’ Masterall 1300 is a water miscible, medium oil, low foaming semi-synthetic fluid designed for high pressure coolant applications. 


PUBLISHED: 7/16/2018

PGM 400 Inspection System Eliminates Expensive Tooling Need

Kapp Niles’ PGM 400 analytical gear inspection system has a measuring ability in relation to functional datums that eliminates the need for expensive tooling or fixtures. 


PUBLISHED: 7/15/2018

EZset Tool Presetters Minimize Machine Downtime

EZset’s ICbasic, IC1, IC2, and IC3 presetters have a variety of measurement ranges and image-processing variations.


PUBLISHED: 7/14/2018

Simcenter Amesim Software Extends System Simulation

Siemens’ Simcenter Amesim software is a 1D mechatronic system simulation platform with two new products, Simcenter Webapp Server and Simcenter Embedded Software Designer, that extend the system simulation capabilities.


RSS RSS  |  Atom Atom