This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: Bar Feeders & Material Handling

PUBLISHED: 10/8/2009

Short Bar Loader for CNC Lathe Automation

The Rebel V-65 Servo is a compact, economically priced short bar loader that features a 5-mm to 65-mm diameter capacity range for feeding spindle length round, square, hexagonal and shaped barstock into CNC lathes. With a large magazine capacity al...

PUBLISHED: 8/31/2009

Custom Bar Feeder

The Sprint 542 from LNS can be adjusted exactly to the customer’s needs. This bar feeder can process bars in a diameter range from 5 to 42 mm.

PUBLISHED: 7/14/2009

New Bar Machine and Lathe Series Offer Increased Productivity

SB Machine Tools represents Shimada's new B6 Series bar machines and 2SI Series CNC lathes. The B6 is a “camless” 6 spindle (or 8 spindle) automatic system with optional CNC slides.

PUBLISHED: 5/1/2009

Bar Loader for the CNC Lathe Automation Marketplace

The Rebel 102 Servo SE (special edition) is a compact short bar loader redesigned model that features an 8- to 102-mm-diameter capacity range for feeding round, square and hexagonal barstock into CNC lathe spindles. With a large magazine capacity f...

PUBLISHED: 3/27/2009

Clean Room Certified Tray Handler

Distech Systems has introduced a clean room certified DS1100 parts feeding machine for medical and pharmaceutical applications. For clean rooms, the system is manufactured almost entirely of stainless steel and has the ability to handle thin, therm...

PUBLISHED: 3/5/2009

Bar Feeder for CNC Lathes

The Minuteman 320 SE (special edition) is a 12-ft. magazine bar feeder designed for feeding round, square and hexagonal barstock into CNC lathes. The bar feeder features a 3- to 26-mm bar diameter capacity with hydrodynamic quick-change polyuretha...

PUBLISHED: 11/25/2008

Through-Spindle Load, Extraction And Transfer Unit

An automated through spindle load, extraction and transfer unit for running Op. 10 to Op. 20 between two CNC lathes was developed by Toellner Systems Inc.

PUBLISHED: 9/30/2008

Automated Bulk Rod Feeders

Toellner Systems Inc. line of automated parts loading for bulk rod/shaft feeders can load a part in less than 3 seconds. This particular system was specifically designed to hold 1,500 4.

PUBLISHED: 6/16/2008

Bar Feeder With Quick Change-Over

The Quick 6 S2 automatic bar feed from LNS provides quck and easy change-overs of the guide tube system for greater range and productivity, and increases safety by eliminating bars of as much as 6 ft. , 2 3/4" protruding from the back of the lathe, ...

PUBLISHED: 6/10/2008

Automated Indexing System

The Kurt Engineered Division is a combination of Kurt's Custom Engineered Workholding Group, its Electronics Division and its partnerships with robotic integrators. The Kurt Engineered Division provides a source for automated systems with solutions...

RSS RSS  |  Atom Atom