NEW PRODUCTS

This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: Toolholders

PUBLISHED: 2/24/2017

Toolholder Presettable in X, Y, Z for Multi-Spindle Swiss-Type Lathes

Göltenbodt has expanded its line of presettable, coolant-fed toolholders with the next generation of toolholders designed for Tornos MultiSwiss 6X4 and Star Swiss-type automatic lathes.


PUBLISHED: 2/24/2017

Selectable Toolholder Speeds Setup and Change-Over

The SpinSelect Multi-Pocket selectable toolholder is designed to increase productivity and consistency by decreasing downtime associated with tool and insert setups and change-overs.


PUBLISHED: 2/9/2017

Big Kaiser’s Smart Damper Designed for Turning

It instantaneously absorbs vibration and eliminates chatter, helping to achieve higher machining accuracy, better surface finishes and increased metal removal rates for higher productivity at critical machining depths.


PUBLISHED: 9/15/2016

NT Tool’s Power Hydro Chucks Provide Precision, Versatility

NT Tool’s PHC-A Power Hydro Chucks utilize a dual clamping-point system to provide 20-percent more clamping force than equivalent collet holders, and maintain 3-micron accuracy, according to the company.


PUBLISHED: 8/10/2016

Seco Toolholders with Simultaneous Taper and Face Contact

The taper-face toolholders are designed for use with dual-contact spindle systems.


PUBLISHED: 7/5/2016

Collets Designed for Use with High-Speed Spindles

Ibag North America displays its Ibag Micro Collet for precision-part manufacturing that enables accuracies of 1-micron TIR at the collet nose and accommodates tool diameters ranging to 1/8".


PUBLISHED: 5/23/2016

Carmex Brochure Features Swiss-Type Tools

The Tiny Tools line has been expanded with the CBR incorporating an advanced chipbreaker for improved chip evacuation in boring and profiling operations.


PUBLISHED: 4/22/2016

DuoJustCut Parting-Off Tool for Swiss Lathes

Even if the first cutting edge is chipped, the other cutting edge can be used because of the design of the insert clamping.


PUBLISHED: 3/1/2016

RBX12 Air Power Spindle Allows Micromachining in a Machining Center

The air-driven spindle enables existing machines to be cost-effectively upgraded to perform high-speed micromachining in a normal machining center since this tool is driven by air supplied through a stop block or through the machine spindle.


PUBLISHED: 2/24/2016

Tendo Aviation Toolholder for Demanding Applicaitons

The toolholder combines the strength of hydraulic expansion technology with that of Weldon toolholders.


RSS RSS  |  Atom Atom