Bar Feeders & Material Handling

Exploring the: Bar Feeders & Material Handling Zone

137 Results for: Product

Sort by:
Published: 8/27/2014

Automatic Bar Feeders with Ergonomic Loading Capabilities
IEMCA Master 80 UP Hyperflexible automatic bar feeders offer ergonomic loading capabilities for reduced lifting and significant increase to magazine capacity.

Published: 8/27/2014

Multi-Mini Rhinobar Adds Multi-Diameter Stock Versatility
Lexair’s Multi Mini Rhinobar bar feeder makes multi-diameter barstock processing faster and easier with a feed tube cartridge that automatically centers and feeds three sizes of small-diameter barstock to Swiss-type CNC screw machines and slid...

Published: 7/13/2014

Fully Automatic Magazine Bar Feeder Incorporates Web Technology
LNS America’s Quick Load Servo S3 T automatic magazine bar feeder loads ¼"- to 4 ¾"-diameter barstock in lengths ranging from 4" to 63", not to exceed overall spindle length.

Published: 7/10/2014

Bar Feeder Offers Space Savings
Edge Technologies FMB 20-100 bar feeder includes quick-change polyurethane guide channels that allow for quiet operation at high RPM while feeding round, square or hex barstock.

Published: 7/2/2014

Bar Feeder Instantly Synchronizes with Headstock
Bucci Industries will introduce the latest addition to its Iemca Boss line of heavy-duty automatic magazine bar feeders, the Bucci Boss IV, which is said to reduce bar-change time by as much as 40 percent.

Published: 6/18/2014

Bar Feeder Centers Barstock with Hydrodynamic Principle
Lexair’s Mini Rhinobar bar feeder automatically centers and feeds small-diameter barstock for Swiss-type CNC screw machines and small fixed- or sliding-head lathes.

Published: 6/16/2014

Master 80HF-12 Bar Feeder Offers Fast Change-Over
The IEMCA Division of Bucci Industries USA’s Master 80HF bar feeder is the ideal 12-ft. bar feeder for those lathes where machining operations vary frequently during the course of the day or for dedicated production running at high speeds, the...

Published: 3/4/2014

IEMCA Bar Feeder Offers Small Footprint
The IEMCA Division of Bucci Industries USA’s bar feeder, Ideal 438, was developed specifically as a bar feeding accessory for Swiss lathes as well as small CNC fixed headstock lathes.

Published: 12/30/2013

Mini Rhinobar Bar Feeder Puts a Charge into Small-Stock Production
Lexair’s Mini Rhinobar bar feeder automatically centers and feeds small-diameter barstock to maximize the productivity of Swiss-type CNC screw machines and small fixed or sliding head lathes.

Published: 7/29/2013

Bar Feeder and Oil Mist Collector
The LNS Alpha 552 is an entry level bar feeder with a mechanical beam that gives the bars optimum stability.