7/23/2019 | 1 MINUTE READ

How Robots and Additive Manufacturing Work Together

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The July issue of Additive Manufacturing magazine takes a close look at the ways automation and AM overlap, from part handling to 3D printing with robotic arms. 

Addere metal 3D printing system

Robots can tend 3D printers, but they can also be used to manipulate the print head. Here, Addere’s system deposits weld wire using a laser head mounted on a Kuka robot. 

Robots and additive manufacturing (AM) are both transformative technologies, with the potential to decrease labor, reduce costs and disrupt the way products are made. But what happens when these two technologies work together?

In the cover story, Evco Plastics explains the process to integrate this Universal Robots cobot with its 3D printers. Read more.

The July 2019 issue of Additive Manufacturing magazine explores how robots and AM intersect in various ways. In our cover story, injection molder Evco Plastics shares its experience integrating a cell of six 3D printers with a collaborative robot (cobot). The work that the cobot performs (removing build plates with finished parts and starting the next cycle) is similar to how it might serve a machine tool, but the integration process required ingenuity and creativity. Evco now has an automated cell that can run 24/7, giving this company the capacity to take on production work that previously would have been cost-prohibitive to injection mold. 

But part unloading isn’t the only way that robots enter into AM. Other stories in this issue include:

  • Addere’s robot-based metal 3D printing system (shown above) uses standard weld wire to build large parts, with a deposition rate that can reach 50 lbs/hr.
  • Research into robot “swarms” could enable a new, ultra-efficient era of 3D printing and automated manufacturing.
  • A San Diego startup is exploring multimaterial metal 3D printing and new ways of thinking about design through Laser Metal Deposition (LMD) technology, now compatible with robotics.
  • Custom 3D-printed grippers made in house are allowing Bilstein of America to get the most out of its cobots.

Read it here and subscribe to receive the next issue in your mailbox or inbox.

 

Additive Conference logo

Additive Manufacturing Conference

This issue also includes a preview and guide to the Additive Manufacturing Conference + Expo, a three-day technical conference, exhibit hall and business networking event focused on the industrial applications of additive technologies for production. Register here.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Production Machining in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Choosing an Automatic Bar Feeder

    The bar feeder is the most common form of automation for turning operations. Selecting the right one requires consideration of the applications for which it will be used.

  • The Many Sides of Workholding

    Here's a broad look at different ways to approach workholding based upon the requirements of the application.

  • Bar Feed Considerations For High-Speed, Lights-Out Machining

    There are design elements incorporated into today’s 12-foot, magazine-load bar feeders that make them more useful for high-speed and untended operation. This article looks at some aspects to consider before purchasing a 12-foot bar feeder.

Resources