4/15/2019 | 1 MINUTE READ

Industry News of Note: April 2019

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

EDM maker starts a new chapter in Ohio, Tornos to host a grand opening in Chicago and other industry news. 

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Ed Beaumont has returned as president of Beaumont Machine, a manufacturer of EDMs and EDM consumables, as the company relocates to a new facility in the Cincinnati, Ohio, area. 

“We needed a fresh start, and we were committed to making it happen on every levelfrom our physical location to the machine offerings to the markets served and more,” Mr. Beaumont says. 

He goes on: “I started the company over 25 years ago, had success in the aerospace industry here in Cincinnati and elsewhere. After five years of semi-retirement, I returned to run the company with three goals in mind: I wanted to relocate the business to a larger facility; expand the machine line to offer more companies the benefits of our unique designs; and lastly, grow our consumables business, a key to long-term relationships with EDM customers.” Read more

Here is some other industry news to note: 


RELATED CONTENT

  • Using Grinding Versus EDM to Finish Form Tools

    Finishing carbide inserts using EDM or grinding.

  • Masters of the Small Hole

    Hole making is considered the most frequently performed metalworking operation. Hole making on a micro level, say 0.010 inch and smaller, is where it gets interesting. This shop is very good at making small holes.

  • Vertical Vise For Wire EDM

    The company’s newly designed vertical vise, Model H4537 for use with its Fixturing System 4000, provides clamping of one or two independent workpieces in the same setup. Two separate clamping jaws are incorporated in the vise that requires tightening the central screw. No supporting spacers or jackscrews are needed as with Toe clamp-type devices.

Resources