Grooving, Cutoff and Multidirectional Turning

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

This single-sided tool is designed to handle a range of applications, including cutoff, grooving, deep grooving, face grooving, side turning and profiling, in a single platform, simplifying the tooling selection process.


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Connect at

Kennametal will be exhibiting new technology at IMTS 2020 in Chicago this September.

Plan to meet up with their team or get registered here!

As manufacturing continues to get more complex, choosing the right tooling for a given application can be quite complicated and time consuming. To address these challenges, Kennametal has developed a system designed to be less complicated to navigate and select, complimented by a simple approach for use.

Beyond Evolution is a single-sided grooving and cutoff system designed for deeper grooving capability than double-ended systems. A “Triple V” design with top, bottom and backside V-shaped seating in the holder pocket creates a pull-in effect for high stability for deep grooving, face grooving, side turning and profiling, among other applications.

Mark Filosemi, senior product manager with Kennametal, says while the system is designed for longer tool life and higher cutting speed, it also meets customers’ most common request—simplification of the selection process. “They wanted to stop leafing through hundreds of pages of catalogs and thousands of items because it was difficult, time consuming and expensive,” he explains.

Kennametal’s website presents a closer look at Beyond Evolution, with animation of the Active Coolant Control feature and videos demonstrating the system in various applications.


  • 5 Process Security Tips for Parting Off

    Here are five rules of thumb from Scott Lewis, a product and application specialist at Sandvik Coromant, to optimize the parting off process, and as a result, maximize tool and insert life. 

  • Precision Lathe Operations on a CNC Mill

    Sometimes a shop doesn’t do enough turning work to justify the purchase of a CNC lathe. But when it needs to produce precision turned parts, even if for a very small lot size, the shop needs a solution.

  • No-Burr Threading Helps Shop Compete

    With the switch from a ground top-notch tool to a pressed Ingersoll threading form tool on one high-volume job, Warren Screw Machine eliminated 2 minutes of hand deburring per part. Not incidentally,  the company also lopped 20 seconds per part off the threading cycle.