6/8/2020

Emuge-Franken Celebrates 100th Anniversary

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The company was begun by Richard Glimpel in 1920, who invented a spiral-pointed tap that could do with one tool what it normally took three to accomplish.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
rendering of Emuge-Franken headquarters

Emuge-Franken, manufacturer of taps, thread mills, drills, end mills and other rotary cutting tools, is celebrating its 100th anniversary. 

In 1920, Richard Glimpel, a German engineer, invented a tap with a spiral point that changed the process of making internal threads, outperforming the three-part tap set by enabling the use of only the one tool. The new tool was so successful it helped secure a large order and growth for the fledgling company that Mr. Glimpel and three employees had started. In 1956, Helmut Glimpel, son of the founder and current owner, joined the company. In 1958 Emuge acquired Franken, a manufacturer of milling tools, and changed its name to Emuge-Franken. In 1983 the company established Emuge Corp. in the United States, which recently expanded its facility in West Boylston, Massachussets. Today, Emuge-Franken has more than 1,900 employees with locations worldwide.

Moving forward, Emuge-Franken has committed to further expansion. Construction is now underway to build a new 215,000-square-foot production facility opposite the current global headquarters in Lauf, Germany. The facility, slated to be fully operational by 2023, will enable significant manufacturing capacity increases, the company says.

RELATED CONTENT

  • Cutting Tool Coating Production

    This article looks at the coating methods available for carbide cutting tools.

  • Broaching On A Lathe

    Producing a keyway, spline or similar longitudinal feature on a turned part usually necessitates an additional, time-consuming, secondary operation on a broaching or slotting machine. That means moving the part to and from a secondary operation, an extra setup, additional labor and hourly machine costs and all of the other headaches that go with secondary operations.

  • Making Micro Threads

    Production of micro threads can be challenging, but using the most suitable tools for a given application can simplify the task.


Resources