3/4/2014

Applitec ZX10 Inserts Provide Increased Chip Control

Originally titled 'Inserts Provide Increased Chip Control'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

FLP Tooling now distributes the Applitec ZX10 & ZXT10 700 series inserts, which provide increased chip control with specialized chipbreakers.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

FLP Tooling now distributes the Applitec ZX10 & ZXT10 700 series inserts, which provide increased chip control with specialized chipbreakers. These chipbreakers are designed to pull the chips away from the material and promote faster chip break-away. Both the ZX10 & ZXT10 are best for machining steel, stainless steel and titanium in grooving/turning and back turning operations. Multiple thickness and radius options are available in TiAlN coating (TiN available upon request).  

RELATED CONTENT

  • No-Burr Threading Helps Shop Compete

    With the switch from a ground top-notch tool to a pressed Ingersoll threading form tool on one high-volume job, Warren Screw Machine eliminated 2 minutes of hand deburring per part. Not incidentally,  the company also lopped 20 seconds per part off the threading cycle.

  • Getting the Most Out of Hard Turning

    Traditionally, production of most parts made from hard or hardened materials, defined as those at or more than 45 HRc, required dedicated grinding equipment and processes.

  • Cutting Tool Coating Production

    This article looks at the coating methods available for carbide cutting tools.

Resources