AR-5C Collet Rotary Table is Alternative for Jaw Chucks

Originally titled 'Collet Rotary Table is Alternative for Jaw Chucks '

CNC Indexing & Feeding Technologies’ TJR AR-5C pneumatic collet rotary table provides an alternative to three- or four-jaw chucks, employs a 5C collet closer system and can be integrated into a CNC machine control as a full fourth axis.

Related Topics:

CNC Indexing & Feeding Technologies’ TJR AR-5C pneumatic collet rotary table provides an alternative to three- or four-jaw chucks for users whose workpieces require the use of 5C collets. The AR-5C rotary table employs a 5C collet closer system and can be integrated into a CNC machine control as a full fourth axis or operated as an indexer via TJR’s Single Axis Controller (SAC), the company says.

The table features a pneumatic braking system and is available in right-handed and left-handed motor mount configurations. According to the company, a radial-axial preloaded bearing system provides high rigidity, and a dual-lead worm shaft and worm gear ensure long-term indexing accuracy in both directions.

Table diameter is 125 mm (4.92"), with a through-hole diameter of 35 mm (1.37"). Minimum indexing increment is 0.001˚ and maximum table rotation speed is 83.3 rpm. Peak allowable workpiece load is 100 kg (220 lb), the table weighs 34 kg (75 lb) and servo motor models are available for FANUC or Mitsubishi tapers, the company says.

Editor Pick

Indexable Punch Broaches and Holders Offer Simple Setup

Slater Tools’ range of indexable punch broaches and holders are designed to machine shapes in workpieces where rotary broaching may not be feasible, such as depth of operation, tough materials, tooth height, chip evacuation challenges and applications that require orientation.