11/25/2008

Carbide End Mills For Aluminum

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Primary Cutter, LLC’s Supermill for aluminum line of carbide end mills has tool geometry specially designed for aluminum applications. The new line features sharp corner, full eccentric relief and diamond like carbon coating for faster stock removal and long tool life. The end mill line for aluminum is available in three flute, variable pitch and with a 45-degree helix angle and is offered in 3/16” to 1” sizes and long and extra long in ¼” through 1”.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Primary Cutter, LLC’s Supermill for aluminum line of carbide end mills has tool geometry specially designed for aluminum applications. The new line features sharp corner, full eccentric relief and diamond like carbon coating for faster stock removal and long tool life. The end mill line for aluminum is available in three flute, variable pitch and with a 45-degree helix angle and is offered in 3/16” to 1” sizes and long and extra long in ¼” through 1”.

RELATED CONTENT

  • Thread Whirling Basics

    The rapidly increasing demand for high-value threaded parts with exceptionally high length-to-diameter ratios has created a lot of interest in thread whirling technology among American shops and manufacturers.

  • Five Process Security Tips When Parting Off

    Here are five rules of thumb from Scott Lewis, a product and application specialist at Sandvik Coromant, to optimize the parting off process, and as a result, maximize tool and insert life. 

  • Plateau Honing Improves Finish and Lubrication Control

    Plateau honing is a process that improves cylinder wall surface finish by removing tiny peaks of torn or folded material and increasing bearing area.

Resources