6/6/2007

Carbide Slot Deburring Tool

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

O. G. Bell Company's carbide slot deburring tool deburrs both sides of a slot after sawing, milling or undercutting.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

O.G. Bell Company's carbide slot deburring tool deburrs both sides of a slot after sawing, milling or undercutting. It chamfers corners with the flat sides of the tool, creating proper 45-degree chamfers on commutator bars. The special replaceable carbide bit has a true positive rake for cutting copper and other materials. The adjustable length handle extends from 5 1/4" to 8 1/4" overall length. The storage compartment is inside the handle for spare bits, screws and so on. The tool can be used in a straight line or offset to the left or right allowing the best slot visibility.

RELATED CONTENT

  • A Standard Approach to Classifying Burrs

    Variations in the definition of a burr created problems for shops trying to provide deburring solutions and for customers trying to figure out what solutions to look for.

  • Selecting Brushes For Burrs

    Deburring is often a practical necessity after cutoff operations. Wire brush systems provide a low-cost and reliable means of automatic deburring of barstock or tube stock.

  • New Tools Automate Hole-Deburring

    New tools increase the efficiency of automatic hole deburring. Some can handle holes as small as 0.030 inch diameter.

Resources