6/6/2013

Chuck Stop Locates Short Parts in a Three-jaw Lathe Chuck

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Royal Products’ chuck stop provides a simple method for locating short parts in a three-jaw lathe chuck.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Royal Products’ chuck stop provides a simple method for locating short parts in a three-jaw lathe chuck. The web-shaped design eliminates the danger of using spacers or parallels that could come loose and be thrown from a spinning chuck. Three strong magnets further secure the stop to the chuck face. Stop allows short parts to project past the chuck jaws, providing clearance for facing operations. Setup time is greatly reduced—no need to bore soft jaws. The Royal chuck stop is accurate—front and back locating surfaces are parallel within ± 0.0004". It accommodates chuck jaws up to 55-mm (2 1/8") wide, and its anodized finish provides good wear resistance. Available in 15-, 20-, 25-, 30- and 35-mm stops. 

Resources