10/3/2012

Chuck Stop Provides a Simple Method for Locating Short Parts

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The Royal Products’ chuck stop provides a simple method for locating short parts in a three-jaw lathe chuck.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

The Royal Products’ chuck stop provides a simple method for locating short parts in a three-jaw lathe chuck. The captive, web-shaped design eliminates the danger of using spacers or parallels that could come loose and be thrown from a spinning chuck. Three strong magnets further secure the stop to the chuck face. The stop allows short parts to project past the chuck jaws, providing clearance for facing operations. Setup time is reduced when using the chuck stops because there’s no need to bore soft jaws.
 

The chuck stops are also very accurate: front and back locating surfaces are parallel within ± 0.0004". The stops accommodate chuck jaws up to 55 mm (2 1/8") wide. Available in 15-, 20-, 25-, 30- and 35-mm stops. 

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Production Machining in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

Resources