9/14/2018

Dual-Gripper, Carbon-Fiber End Effector Increases Robot Productivity

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

All Axis Robotics has introduced a dual-gripper, carbon-fiber end effector for collaborative robots in the metal fabrication industry.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

All Axis Robotics has introduced a dual-gripper, carbon-fiber end effector for collaborative robots in the metal fabrication industry. Incorporating carbon fiber’s high strength-to-weight ratio into the end effector’s design is said to enable greater payloads, increase speed on the production line, reduce motor and actuator loads, and increase heat resistance.

The primary feature of this carbon fiber end effector is a quick-disconnect interface hub that is said to enable standard metal or wood finishing tools to be coupled to a robot within minutes. The dual-mounting design enables two different sets of grippers to be affixed to the end effector, increasing productivity of the robot movements.
Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Production Machining in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Barfeeding Small Diameters

    This shop may be located off the beaten path but it’s certainly found a successful and profitable home by applying top of the line technology to its medical part production mix.

  • The Long And Short Of Bar Feeder Selection

    For many shops, the decision comes down to a 4- or 12-foot-capacity magazine-style bar feeder. Here are some guidelines for choosing between them.

  • What Is The Best Bar Feed System For Production Turning?

    Selecting the right bar feeder can be one of the most important decisions a shop can make. Bar feed systems help improve productivity, throughput and quality, but in order to achieve the most benefit from them it is essential that a bar feed system be matched to the particular needs of the turning operation.

Resources