This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

PUBLISHED: 11/22/2019

Grieve's Inert Atmosphere Bench Furnace Provides a Myriad of Features

Features include a vertical lift door with gas spring counterbalance and inert atmosphere construction, including a continuously welded outer shell, high-temperature door gasket, sealed heater terminal boxes, inert atmosphere inlet and inert atmosph...

PUBLISHED: 11/20/2019

Mitutoyo's QM-Height Gauge Uses Several Forms of Measurement

The QM-Height is used to measure height, height difference (step), inside/outside widths, inside/outside diameters, circle pitch, free-form surface maximum/minimum heights and height difference by scanning measurement.

PUBLISHED: 11/16/2019

Oelheld Adds Entry-Level Option to Sintogrind Series of Grinding Oils

GTL technology converts natural gas into high-quality liquid products that otherwise would be made from crude oil.

PUBLISHED: 11/14/2019

Blue Photon's Adhesive Workholding System is Photo-Activated

Blue Photon's workholding grippers are a load-bearing, light-transmitting fixture component that locks the part in place for machining.

PUBLISHED: 11/13/2019

Starrett Automated Digital Hardness Testers Produce High Accuracy Measurements

The new Starrett hardness tester models use a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit instead of traditional dead weights, enabling high accuracy measurements at all test loads up to ...

PUBLISHED: 11/12/2019

Replaceable Head Drill Body Expansion for Large-Diameter Drilling

Existing body options—3xD, 5xD and 8xD—have been expanded with a 12xD for deep hole applications and a 1.5xD for improved rigidity in shallow hole and plate drilling.

PUBLISHED: 11/11/2019

Automatic Tool Changer for Dual-Drive Press Brakes

MC Machinery Systems’s high-capacity automatic tool changer for its BH series of dual-drive press brakes is designed to increase production levels and utilization rates while reducing setup time, especially in high-mix, low-volume environ...

PUBLISHED: 11/4/2019

Emuge's Slim Line Chucks Bring Versatility to 5-Axis Milling

Emuge says its FPC chucks provide improved rigidity, vibration dampening, concentricity, machining speed and tool life.

PUBLISHED: 11/2/2019

DAC System Connects Toolrooms by Exchanging Tool Data

The DAC establishes the connection with a corporate network and manages the exchange of target and actual values (as well as other tool data) between the individual toolroom stations.

PUBLISHED: 10/28/2019

Schwanog Expands its Line of Escomatic Machines

Escomatic machines have holders for left and right-hand applications.