This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

PUBLISHED: 12/8/2019

Inovatools’ VHM-Deepmax Drills Without Chip Removal Up to 30×D

Deepmax drills have a tool life of 75 m with normal wear. They are made 15×D, 20×D, 25×D (all up to 12-mm diameter) and 30×D (up to 10 mm diameter).

PUBLISHED: 12/7/2019

Mitutoyo's Miscan Vision System Suitable for Difficult Imaging

The Miscan uses autonomous scanning, covering micro-form to large workpieces. It can use styli as small as 125 microns diameter to measure microscopic workpieces. 

PUBLISHED: 12/6/2019

TDM System's Global Line 2019 Aims to Meet Shops' Software Needs

TDM Shopfloor Manager enables comprehensive workflow management, incorporating booking functions and interfaces for crib systems, presetting devices and machines as well as for high-level systems such as MES, FMS and ERP.

PUBLISHED: 12/6/2019

Six Sigma's Orion Mini Sorts Small Parts with Tracking Software

Parts continue to travel around the platen after inspection until they arrive at an air blow-off. 

PUBLISHED: 12/5/2019

Tungaloy's ETTL Insert Improves Efficiency for Parallel Thread Milling

Thread milling provides a high level of security thanks to the light cutting load generated when the tool breaks the chip in smaller pieces, preventing the chip from being jammed, which typically occurs during tapping.

PUBLISHED: 12/4/2019

Dormer Pramet Expands its Line of Milling Tools for Die and Mold

A strong main cutting edge is said to enable a high durability and process security, especially when machining corners inside a pocket. 

PUBLISHED: 12/3/2019

Walter's HU5 Universal Geometry Improves Metal Removal in Tough Materials

The HU5 has a larger seating surface than double-sided negative inserts. This is said to increase stability and enable deeper cutting depths, feed rates and metal removal rates.

PUBLISHED: 11/23/2019

Ibag Micro Spindle Converter Operates Two Spindles Simultaneously

Ibag’s micro spindle converter enables space-saving and improved control of spindles, the company says.

PUBLISHED: 11/22/2019

Grieve's Inert Atmosphere Bench Furnace Provides a Myriad of Features

Features include a vertical lift door with gas spring counterbalance and inert atmosphere construction, including a continuously welded outer shell, high-temperature door gasket, sealed heater terminal boxes, inert atmosphere inlet and inert atmosph...

PUBLISHED: 11/20/2019

Mitutoyo's QM-Height Gauge Uses Several Forms of Measurement

The QM-Height is used to measure height, height difference (step), inside/outside widths, inside/outside diameters, circle pitch, free-form surface maximum/minimum heights and height difference by scanning measurement.