4/7/2015

Small-Diameter Disc Brushes Access Hard-to-Reach Areas

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Brush Research’s Nampower high-performance abrasive nylon disc brush line now includes a selection of small-diameter tools.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Brush Research’s Nampower high-performance abrasive nylon disc brush line now includes a selection of small-diameter tools. These new brushes are available in 50-, 60- and 80-mm diameters in both dot- and turbine-style configurations. A specialty flow-through toolholder with a 16-mm shank is also available to accommodate the smaller-diameter tools.

The brushes are made of a combination of ceramic and silicon carbide abrasive nylon mounted to a thermoplastic base. Because of their smaller diameters, the brushes offer greater versatility for hard-to-reach areas, smaller applications and planetary head mountings for consistent and cost-effective results, according to the company. They can be integrated into automated machinery such as CNC machining centers, transfer lines and robotic cells.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Production Machining in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • Electropolishing Returns To The Surface

    Manufacturing engineers are taking a closer look at some old-line processes to help solve some critical metal surface problems. Electropolishing is one such process worthy of closer inspection.

  • A Standard Approach to Classifying Burrs

    Variations in the definition of a burr created problems for shops trying to provide deburring solutions and for customers trying to figure out what solutions to look for.

  • Bolt On Deburring

    Burrs are a nemesis for most metalworking shops. And cross-hole burrs are among the worst cases that shops encounter. For most applications, deburring must be done off-line as a secondary operation.

Resources