1/17/2019

Solid Carbide Drill Provides 140-Degree Point Angle for Accuracy

Originally titled 'Carbide Drill Provides 140-Degree Point Angle for Accuracy'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Walter USA’s DC150 Perform 5×Dc is designed to be a versatile and cost-effective solid carbide drill that can be used with all materials and with a broad range of workpieces.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Walter USA’s DC150 Perform 5×Dc is designed to be a versatile and cost-effective solid carbide drill that can be used with all materials and with a broad range of workpieces. The drill, a part of the DC150 Perform Line, can be used for small and medium batch sizes. It is said to offer high precision and process reliability.

The DC150 Perform 5×Dc is designed to be used without internal coolant. It offers wear resistance and effective chip evacuation along with geometry which includes a 140-degree point angle for positioning accuracy.

Until now, the DC150 Perform line included length-to-diameter ratios of 3, 5, 8, and 12×Dc, all with internal coolant capability. The 5×Dc drill for use with external coolant complements the existing 3×Dc offering for external coolant, the company says.

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Production Machining in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • No-Burr Threading Helps Shop Compete

    With the switch from a ground top-notch tool to a pressed Ingersoll threading form tool on one high-volume job, Warren Screw Machine eliminated 2 minutes of hand deburring per part. Not incidentally,  the company also lopped 20 seconds per part off the threading cycle.

  • Broaching On A Lathe

    Producing a keyway, spline or similar longitudinal feature on a turned part usually necessitates an additional, time-consuming, secondary operation on a broaching or slotting machine. That means moving the part to and from a secondary operation, an extra setup, additional labor and hourly machine costs and all of the other headaches that go with secondary operations.

  • Five Process Security Tips When Parting Off

    Here are five rules of thumb from Scott Lewis, a product and application specialist at Sandvik Coromant, to optimize the parting off process, and as a result, maximize tool and insert life. 

Resources