3/15/2001

Thread Milling Attachments--TSE--Tool Systems Eng./SPC Innovations

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

On display will be the TSE quick-change and presettable toolholders for multi-spindle automatics as well as multi-spindle attachments for shaving, flat generation, recessing, broaching and other operations. Previously these toolholders and attachments were available only for European multi-spindle automatics. Now th

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

On display will be the TSE quick-change and presettable toolholders for multi-spindle automatics as well as multi-spindle attachments for shaving, flat generation, recessing, broaching and other operations. Previously these toolholders and attachments were available only for European multi-spindle automatics. Now they are available for Acme, Euroturn, Wickman and New Britain, as well as Gildemeister, Index, Schutte and Tornos. The company will also display the Detector In Process gage for length/diameter as well as the newest true diameter checker, the 0-40, which was recently introduced. These gages are designed for high production machining on multi-spindle automatics and transfer machines. They measure each part without slowing the cycle time and will shut off the machine if an out-of-tolerance part is found. In addition, the company will display tiny broken drill detectors that can fit in the crowded screw machine or CNC environment and operate flawlessly, the company says. Visitors will also see the company's collets, solid type feed fingers that can be drilled to the shop's preference, cams and roller supports.

RELATED CONTENT

  • Chip Control

    I discovered that chip control actually means controlling chips as they are being cut off of a workpiece.

  • Taking the Heat Off Live Tooling

    As live tooling becomes more popular in many CNC turning centers, the use of tooling with sealed bearing performance is becoming a challenge for shops that produce components in high volumes or with lengthy cycle times.

  • Swiss-Type Machines: More Than Just A Lathe

    CNC Swiss-Type machines have more capability built in than ever before. Many of these capabilites can be accessed using attachments that increase the throughput of the machine tool, improve the quality of the work coming off the machine and reduce or eliminate the need for secondary operations even for very complex workpieces.

Resources