Thread Turning Toolholder Directs Coolant Flow
Appears in Print as: 'Toolholder Directs Coolant Flow'
Carmex’s X-treme Jet external thread turning toolholder provides two connecting options via an elbow fitting and top clamp to direct the coolant flow to the cutting edge.
Carmex’s X-treme Jet external thread turning toolholder is designed for coolant flow and improved chip control. It provides two connecting options via an elbow fitting and top clamp to direct the coolant flow to the cutting edge.
Available in both RH and LH configurations, the toolholder is coated for abrasive resistance. It can be used for high-pressure coolant applications and the directed flow reduces cutting edge temperature, resulting in higher performance, improved chip flow and longer tool life.
To achieve insert performance, it’s necessary to select the right combination of tool and toolholder. This toolhoder can optimize cutting performance, while providing the additional efficiencies of improved coolant effectiveness and longer tool life.
RELATED CONTENT
-
The Many Sides of Workholding
Here's a broad look at different ways to approach workholding, from bar feeders to collet chucks to robotics.
-
Tools and Technologies for Deep Hole Drilling
Understanding the challenges of deep hole drilling and knowing how to select and apply the appropriate tools will help a shop profit from this operation.
-
Bar Feeder Basics
Some primary factors are often overlooked when considering how to justify the implementation of a bar feeder for turning operations.