NEW PRODUCTS

This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: Turning Tools

PUBLISHED: 10/22/2018

Duro-A RC Chuck Reduces Setup Time

Röhm’s Duro-A RC power chuck reduces setup times because of its quick jaw-change system that enables the jaws to be adjusted, reversed or swapped out in 50 seconds.


PUBLISHED: 8/17/2018

Indexable Inserts Turn Threads in Tight Spaces

The A60 and AG60 Walter Cut MX indexable grooving inserts for small- to medium-pitch threads deliver multiple advantages.


PUBLISHED: 7/8/2018

KBH10 Hard Turning Inserts Provide Rxtreme Wear Resistance

Kennametal Inc.’s KBH10 polycrystalline cubic boron nitride (PcBN) hard turning inserts provide wear resistance needed to turn hardened metals up to 65Rc, especially where very fine surface finishes are required. 


PUBLISHED: 6/30/2018

CS300 Ceramic Inserts, Cutter Bodies Maximize HRSA Machining

Seco Tools’ Secomax CS300 ceramic inserts and cutter bodies reduce machining cost per workpiece, increase output and lower energy consumption.


PUBLISHED: 6/3/2018

Steadyline Tooling for Large Diameter Work Dampens Vibration

Seco Tools’ Steadyline vibration-dampening tooling system absorbs vibrations before they spread through the bar. 


PUBLISHED: 5/31/2018

WavyJoint CBN Inserts Enable Hard Turning

Tungaloy’s WavyJoint CBN inserts are a CBN brazing technology for high productivity in hard turning operations that are designed to improve machining efficiency.


PUBLISHED: 5/15/2018

CBN and PCD-Tipped Inserts Perform Custom Geometries

Thinbit’s inserts tipped with CBN and PCD are said to provide an increased production rate, improved surface finish and dimensional control when used on high-temperature alloys and when used on nonferrous and abrasive metal.


PUBLISHED: 4/15/2018

T-Turn FM Chipbreaker Designed for Steel and Stainless Steel

Ingersoll Cutting Tool Co.’s T-Turn FM chipbreaker series is designed especially for steel and stainless steel applications where semi-finish to medium machining is required.


PUBLISHED: 3/31/2018

Perform Line Insert Grades Boost Performance and Reliability

The Walter Perform Line of turning tools’s two insert grades, the WPV10 and WPV20, are beneficial to users who have difficulties measuring the tool life of an insert and who change inserts at set intervals.


PUBLISHED: 3/30/2018

PCBN Insert Grades Cover a Spectrum of Hard Part Turning

Seco Tools’ PCBN insert grades cover a spectrum of hard part turning applications and extend tool life and increase productivity in a broader range of applications by using a bimodal substrate and nanolaminate coating process.


RSS RSS  |  Atom Atom