2L Inc.

4 Kane Industrial Dr.
Hudson, MA 01749 US

Connect

A Message from 2L Inc.

Company Profile

2L is a manufacturer of Engraving Tools and Carbide Cutters.

Conical Ballnose Engraving Tools for Standard and Reverse 3D Engraving Applications Are Now Available.

Conical Ballnose Engraving Tools for Standard and Reverse 3D Engraving Applications Are Now Available.

Conical Ballnose Engraving Tools for Standard and Reverse 3D Engraving Applications Are Now Available.

The Vac-Vise Workholding System can be used as a Vacuum Chuck or Pallet System simultaneously to hold a wide variety of workpiece shapes and sizes.

Conical Ballnose Engraving Tools for Standard and Reverse 3D Engraving Applications Are Now Available.

2L inc.'s Patented Spring Loaded Engraving Tool, for engraving flat, curved and uneven surfaces is now available with 1/4", 1/2" or 3/4" shanks for CNC machines which have limited distance between the spindle and the workpiece table. 2L has expanded its' Spring Loaded Engraving Tool product line to offer two additional size Spring Loaded Engraving Toolholders to meet the engraving requirements of operators using smaller CNC Engraving or Milling Machines.

As Seen In Production Machining

2L One

Technical Member Profile: 2L Technoogies
2L Technologies is one of the newest members of the PMPA, having been founded in 2008. However, the company’s roots go back more than 30 years.

large vacuum chucks

Large, Modular Vacuum Chucks
2L inc. has added two large vacuum chucks to its product line: 18" x 36" and 24" x 48" are now available.

modular vacuum chuck

Vacuum Chuck Top Plate
2L offers a replaceable aluminum top plate for the modular Vac-Vise vacuum chuck systems. The precision ground replaceable top plate works in conjunction with the vac-vise modular vacuum chucks.

2L Vac-Vise

Vacuum Chuck Kits
2L's Vac-Vise vacuum chuck system is now offered in preconfigured multiple pallet vacuum chuck kits to accommodate many different sized workpieces. The workholding system is available in four preconfigured multiple pallet kits. These quick-to-order kits take advantage of the building block, modular concept of the company's vacuum chuck to create the size vacuum chuck needed for each job without the need of a custom vacuum chuck or setup.

Engraving Tool
The 2L Tough Tip engraving tool was specifically developed to address a need for a durable tool that would last longer while engraving harder materials, the company says. The tool's "V" design maximizes the tip strength of the tool by removing a minimum amount of material from the tool end; retaining the maximum amount of tool material strengthens the tool tip and increases the tool life, according to the company. The tools can be used with the company's spring-loaded engraving toolholder, CNC milling machines, hand-held engraving machines and industrial marking equipment.

CNC Workholding And Fixturing
2L inc. 's Pallet-Vise workholding system can be used as a stand-alone workholding solution for typical machining or used in a multiple pallet configuration for large high-volume production. The Vac-Vise system can be used as a vacuum chuck or pallet system simultaneously to hold a variety of workpiece shapes and sizes.

Product Categories of 2L Inc.

Chamfering Tools
Chucks, Vacuum
Clamps & Fixturing Devices
Collets for Toolholding
Diamond Tools
Drills
End Mills
Fixturing Systems
Identification Systems
Marking & Engraving
Marking Tools
Software, CAD/CAM
Toolholders
Workholding, Custom

Trade Names

2L inc.