Seco Tools, LLC

2805 Bellingham Drive

Troy, MI 48083 US

Connect

A Message from Seco Tools, LLC

Company Profile

Headquartered in Troy, Michigan, Seco Tools, LLC is among the largest providers of complete metal cutting solutions for milling, turning, holemaking and threading operations.

Seco Re-engineers Perfomax to Further Optimize Drilling Performance

With a new re-engineered design, the Seco Perfomax indexable insert drill delivers higher drilling parameters and longer tool life as well as exceptional chip control and evacuation.

New Seco Feedmax –P Goes Above and Beyond Drilling Technology

With the new Seco Feedmax –P drill, manufacturers gain the potential to significantly boost holemaking performance beyond that of current drilling technology for ISO P (steel), as well as cast-iron, workpiece materials.

Seco Widens Disc Mill Cutter Range with New Innovations

Seco has further expanded the industry’s widest selection of disc milling inserts and cutter bodies to meet customer demands for reliable, high performing cutters.

New Seco Face Milling Cutter Body Doubles Tool Life

The new R220.88 face milling cutter family from Seco features inserts with eight cutting edges and optimized geometries that provide excellent tool life and reduced cutting forces.

Seco Expands Solutions for Hard Turning with New PCBN Grades

Seco Tools has expanded its family of PCBN insert grades to cover the entire spectrum of hard part turning applications.

New Seco End Mills Boost Material Removal Rates for a Wide Range of Materials

Seco Tools recently released two new solid-carbide end mills that significantly boost metal removal rates and offer exceptionally long tool life for a variety of today’s challenging workpiece materials.

New TP3501 Secure Grade with Seco Used Edge Detection

Seco Tools has expanded its family of Duratomic-technology-based TP grades to include TP3501, a grade that provides optimal application security.

Seco Increases Flute Options for Popular Jabro High-feed End Mill

Seco has expanded the high-feed machining applicability of its Jabro-HFM JHF980 solid-carbide end mill with new 4- and 5-flute options.

Solid-carbide End Mills with Smaller Neck Diameters Increase Application Range

The Jabro-Solid2 JS554 range of solid-carbide end mills gains further utility and versatility with smaller neck diameter options.

Niagara Cutter Stabilizer 2.0 Doubles Feedrates, Shortens Cycle Times

Niagara Cutter, a subsidiary of Seco Tools, LLC, recently launched its new Niagara Cutter Stabilizer 2.0 next-generation family of end mills.

New High Feed Cutter Boosts Material Removal Rates in Tough Materials

Seco Tools' High Feed 6 is the latest addition to the High Feed series of indexable-insert milling cutters specifically designed for difficult-to-machine materials.

Chrome is the New Black.

Seco's new Duratomic technology coating, featured on the TP2501, TP1501 and TP0501 steel turning grades, has a high-contrast chrome color that makes used-edge detection possible with the naked eye -- all without impacting tool performance or cutting data.

As Seen In Production Machining

Seco management receiving award

Seco Wins Supplier Award From Distributor Organization
Seco Tools was awarded Supplier of the Year at the 2018 gathering of the affiliated distributors industrial members, suppliers and service providers in Orlando, Florida.

Seco Tools Names New Manager of Engineering Services
In addition to the company’s Technical Center, Mr. Martin will now manage Seco’s engineered solutions team, working closely with customers to assist in the development of manufacturing processes.

MDT tooling head

MDT System Offers a Variety of Applications
Seco Tools’ MDT tools offer a variety of applications including grooving, profiling, turning, parting-off and threading.

TS2000 cutting tool

Seco TS2000 and TS2500 Grades Boost Surface Quality
The Seco Tools’ heat-resistant TS2000 and TS2500 grades employ manufacturing techniques including an edge preparation process and coating.

Seco Tools Joins OMIC R&D as Industry Partner
With a total now of 17 manufacturing industry partners and three Oregon public universities, OMIC R&D continues to build an operation to develop advanced metals manufacturing technologies through its research and development activities.

SECO Tools Selects MachineMetrics to Help with Transformation
MachineMetrics’ manufacturing analytics engine will provide Seco and its customers a technological resource for its advancement into Industry 4.0.

Jeff Bowden

Seco Tools Names Jeff Bowden as New Director of IT
In addition to his work for the North American branch of the company, Mr. Bowden will act as the regional IT demand manager for Seco Tools AB.

Ceramic inserts and cutter bodies

CS300 Ceramic Inserts, Cutter Bodies Maximize HRSA Machining
Seco Tools’ Secomax CS300 ceramic inserts and cutter bodies reduce machining cost per workpiece, increase output and lower energy consumption.

Vibration-dampening tooling system

Steadyline Tooling for Large Diameter Work Dampens Vibration
Seco Tools’ Steadyline vibration-dampening tooling system absorbs vibrations before they spread through the bar. 

Parting-off blades and square-shank blocks

Seco Expands Parting-Off Blades to Fit VDI Turrets
Seco’s 150.10‑Jeti parting-off blades and square-shank blocks include a VDI block design directly held by adapters onto the blades, offering streamlined delivery of high-pressure coolant to the cutting zone without the use of hoses.

insert grades

PCBN Insert Grades Cover a Spectrum of Hard Part Turning
Seco Tools’ PCBN insert grades cover a spectrum of hard part turning applications and extend tool life and increase productivity in a broader range of applications by using a bimodal substrate and nanolaminate coating process.

Thread chaser holder

Precision Thread Chaser Holders Support Vibration Dampening
Seco Tools’ precision thread chaser holders support Steadyline vibration damping bars and Capto tooling with carbide-pin locating systems, pocket seat surface patterns and high-pressure coolant delivery.

R217/220.28 cutters

R217/220.28 Cutters Incorporate Double-Sided Round Inserts
Seco Tools’ R217/220.28 cutters have a body design that incorporates double-sided round inserts to perform face milling, slotting and contouring in ISO M and ISO S materials, as well as some difficult-to-machine ISO P materials, such as martensitic stainless steel.

TP grades

TP3501 Secure Grade Provides Application Security
Seco Tools’s Duratomic-technology-based TP grades include TP3501, a grade that provides application security for steel turning applications that involve numerous interrupted cuts, less stable machines, short time in cut or weak setups due to part size or shape.

Seco Tools de Mexico employees

Seco Tools de Mexico Serves Local Customers
Seco recently opened a Seco Tools de Mexico facility in Querétaro that will provide customers access to the company’s full range of tooling, training programs and engineering services and will be able to provide support and services for these customers locally.

End mills

Jabro-HFM JHF181 End Mills Boost Removal Rates
Seco Tools LLC’s Jabro-HFM JHF181 end mills boost metal removal rates and offer long tool life for challenging workpiece materials and high-feed milling strategies in hardened steels and nickel-based alloys. 

R220.88 face milling cutter

Seco Face Milling Cutter Body Doubles Tool Life
Seco’s R220.88 face milling cutter family features inserts with eight cutting edges and optimized geometries that provide tool life and reduced cutting forces, with 88-degree lead angle that allows for large depths of cut with smaller insert sizes. 

Student Intern

Seco Partners with University for Engineering Internship Program
Seco has partnered with FSU to offer local area engineering students a multi-year internship program. After an initial first-year internship, based on interest and performance they are potentially asked back for a second year and often offered employment.

Seco Tools Partners with University for Engineering Internship Program
Seco Tools has partnered with Ferris State University in Big Rapids, Michigan, to offer local area engineering students an opportunity to participate in a multi-year internship program at Seco.

Seco Promotes Thomas Funke to Component Engineered Tooling Manager
In his new position, Mr. Funke will oversee a team of engineers to deliver complete component tooling solutions to Seco customers.

Product Categories of Seco Tools, LLC

Arbors (for Cutters)
Boring Tools & Heads for Machining Centers
Boring Tools for Turning Machines
Broaching Tools
Burnishing Tools (Roller)
Chamfering Tools
Collets for Toolholding
Collets, Solid and Master
Counterbores/Countersinks
Cut-Off Tools/Attachments
Diamond Tools
Drills
End Mills
Facing Tools/Heads
Gear Cutting Tools
Grooving Tools
Inserts, Indexable (Carbide, etc.) & Tool Inserts
Milling Cutters
Milling Heads/Attachments
Reamers
Thread Milling Cutters
Threading Tools
Threading Tools - Cutting
Toolholders
Tooling Systems, Modular and/or Quick-Change

Trade Names

Alg®
Axiabore®
Axialibrabore&#153
Axiaset™
Balansetter®
Bifix&#174
Carboloy®
Combimaster&#174
Cone/Face®
Crownloc&#174
Crownloc® Plus
Double Octomill™
Duratomic®
Easyshrink®
Epb®
Graflex&#174
Hexamill&#174
Induflex®
Indusetter®
Jabro™
Jabro™-Solid2
Jetstream Tooling&#153
Jumbobore®
Kegel/Flansch®
Librabore®
Libraflex®
Liteline&#153
Minimaster®
Minimaster® Plus
Mini-Shaft™
Monobloc™
Nano Turbo&#153
Nanobore®
Nanofix™
Octomill&#174
Perfomax&#174
Power 4™
Pramet®
Precifix&#153
Precimaster&#153
Quattromill®
Radiabore®
Rigid-Fit™
Seco Application Suite™
Seco Cut™
Seco Device™
Seco Feedmax™
Seco Guide™
Seco High Feed 2™
Seco High Feed 4™
Seco High Feed 6™
Seco Plus™
Seco Point™
Seco Threading Wizard™
Seco®
Seco-Capto™
Seco-Kestak™
Secolor&#174
Secomax&#174
Seconomy™
Secotools®
Shrinkloc™
Snap-Tap&#174
Solidmaster®
Square 6&#153
St Snap-Tap™
Steadyline&#153
Threadmaster™
Toolperf™
Twin Threader®
Xfix™