Danray Products LLC

973 Featherstone Road, Unit 115
Rockford, IL 61107-5908 US


As Seen In Production Machining

Sander Safety Scale Verifies Openings Between Belt and Disc
Danray Products LLC’s sander safety scale verifies that the openings between the belt and disc and the tables on sanders are 1/8" or less.

Lathe Chuck Shields Protect Operators
Danray Products offers 52" and 62" steel lathe chuck shields for lathes or similar machines.


Steel Chuck Shields for Lathes
Danray Products LLC recently introduced 12", 18", and 24" steel lathe chuck shields for lathes or similar machines.

Danray's Steel Lathe Chuck Shields are Designed for Similar Machines
Danray Products LLC offers heavy-duty steel lathe chuck shields that are designed for lathes or similar machines.

Machine Shield Catalog

Machine Shields Catalog
• Catalog MS features machine safety shields, safety scales, safety signs and lamps • Includes a new bench grinder safety scale, a new warning sign for safety blocks and a new U-shaped shield • These heavy-duty American-made products comply with applicable OSHA, ANSI and CSA safety standards     .

Safety Sign For Lathes
The danger sign for lathes from Danray Products addresses the main safety hazards created by rotating chucks and workpieces on lathes. This sign is 5" L × 6" H and 0. 002"-thick polyester sign has a high-bond strength acrylic adhesive that is chemical-resistant and has holding strength even at high temperatures (as high as 350°F).

Safety Sign For Bench Grinders
The company’s 5" × 6" safety sign for bench grinders addresses the main safety hazards created by rotating wheels on bench grinders. It also informs operators and employers of the proper work-rest and tongue adjustments for compliance with OSHA 29 CFR 1910. 215, ANSI B11.

Guard Safety Scale
When a barrier guard is used for safeguarding on a machine, it must be designed, constructed, applied and adjusted so that people cannot reach over, under, around or through the barrier guard to reach the hazard. However, most barrier guards have openings in them because they are made out of materials such as wire mesh, expanded metal, rods or hairpins. Openings are also needed for feeding and retrieving workpieces.

Machine Shields
- Catalog MS features lathe chuck shields, portable chip/coolant shields, snake arm shields, snake lamps, new safety signs and a new guard safety scale - Products comply with applicable OSHA, ANSI and CSA safety standards   .

Lathe Chuck Shields
Danray Products' heavy-duty lathe chuck shields are designed to apply to lathes or other similar machine applications. The 3/16"-thick polycarbonate shields provide a barrier between the chuck and workpiece and the operator. The shields also deflect chips, coolant and other particles.

Lamps Ensure Proper Lighting For ANSI Compliance
Danray Products offers snake-arm lamps that will light the point of operation of machines or work areas where additional light is required to help industrial users meet applicable ANSI B11-series safety standards as well as the ANSI/IESNA RP-7-01 standard for lighting requirements. Each lamp uses a 100-W maximum ordinary incandescent light bulb. The snake arms are made of spring steel covered with vinyl to protect them from grease, oil and contaminants that would weaken their holding ability.

Product Categories of Danray Products LLC

Safety Related Products