Exair Corporation

11510 Goldcoast Dr
Cincinnati, OH 45249 US

Connect


EXAIR Corporation manufactures compressed air products that solve common industrial problems.

Super Air Knives – Blowoff, clean, dry and cool with less noise and air consumption. Super Air Amplifiers – Vent, exhaust, cool, dry and clean. Air Jets and Nozzles – Reduce noise levels and air costs on blowoff operations. Static Eliminators – Eliminate static electricity, dust and shock hazard. Line Vac Air Operated Conveyors – Convey parts, materials and waste. Chip Vac – Vacuums chips directly into a 55-gallon drum. Drum Vac – With a turn of a knob, this liquid vacuum quickly fills or empties a 55-gallon drum. Vac-u-Gun – Vacuum, blow and transfer with no moving parts. Vortex Tubes and Spot Cooling Products – Cold air for industrial spot cooling problems. Cold Gun Air Coolant Systems – Cool machining operations with cold clean air. Cabinet Coolers – Cool and purge NEMA 4, 4X and 12 electrical control panels.

As Seen In Production Machining

Exair Cabinet Coolers Resist Heat and Corrosion
Exair Corp.’s small 316 stainless steel cabinet coolers permit just enough cooling for the electronics without going so cold as to waste compressed air.

air gun

Exair Air Gun Uses Smallest Back Blow Nozzle
Exair Corporation's Soft-Grip Back Blow air gun uses one of the smallest back blow nozzles on the market.

Super Air Wipe

3/8” Super Air Wipe Dries, Cools and Cleans Small Diameters
Exair’s 3/8” Super Air Wipe has a split design that can be clamped around continuously moving material such as wire, cable, pipe, hose and extruded shapes.

Super ion air knife

Gen4 Super Air Knife Eliminates Static
Exair’s Gen4 super ion air knife eliminates static on plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem. 

Atomizing spray nozzle

1/4 NPT No Drip Atomizing Spray Nozzle Covers 360 Degrees
Exair’s 1/4 NPT No Drip internal mix 360-degree hollow circular pattern atomizing spray nozzle can provide a smooth, even coating on the inside diameter of a pipe or similar ductwork and is also effective for operations where mist over a broad area is needed.

Back blow air nozzle

1004SS, M4 NPT Back Blow Air Nozzle Cleans Inside Diameters
Exair’s 1004SS, M4 NPT back blow air nozzle has an array of holes that provide a 360-degree airflow to clear out coolant, chips and light oils from machining processes. 

Cooler system

Small 316SS Cabinet Coolers Resist Heat and Corrosion
Exair Corp.'s small 316 stainless steel cabinet cooler systems with ETC (electronic temperature control) keep electrical enclosures cool while maintaining the NEMA 4X rating of the enclosure and resisting the heat that could adversely affect internal components. 

Product Categories of Exair Corporation

Chillers
Chip & Sludge Dragouts
Chip Conveyors
Coolant Delivery Systems
Coolant Reclamation Equipment
Coolants, Cutting Fluids & Oils
Dust Collectors & Air Filtration
Environmental & Pollution Control Equipment
Leak Testing Equipment
Pumps, Coolant
Safety Related Products