Royal Products

200 Oser Avenue

Hauppauge, NY 11788 US

Connect

Royal Filtermist

The Royal Filtermist is a low-cost, highly efficient mist and smoke collector designed specifically for the metalworking industry. There are currently over 125,000 Filtermist units operating in over 40 countries worldwide, making Filtermist the world’s leading mist eliminator. The Royal Filtermist is available in four sizes, ranging from 275 – 1200 cfm, and can be mounted in a variety of configurations to suit virtually all machine tool requirements.

A Message from Royal Products

Supercharge Your Machine Tools

Royal Rota-RackThe Royal Rota-Rack is a lean, cost-effective device that enables any bar-fed CNC lathe to run unattended for extended periods of time.

Royal Low-Profile CNC Collet Chucks

Royal Low-Profile CNC collet chucks are available in both pullback and Accu-Length versions to cover a wide range of medical, aerospace, automotive, and general turning applications.

As Seen In Production Machining

Understanding CNC Collet Chucks
Workholding for turning is usually fairly basic: The selection comes down to chucks or collets. This article looks at when to consider the collet chuck and what kind might be best for a given application.

Quick-Grip collet chuck with installation tool

Discovering the Benefits of Collet Chucks
For shops making all types of parts, collet chucks can provide faster change-over, an increased gripping range, high rigidity and reduced maintenance.

Management Structure Change at Royal Products
Royal Products has promoted Tom Sheridan to president of the company and Mr. Jakubowsky to executive V.P.

Royal Products Hires Regional Business Manager
Royal Products has hired Zak Lyon as a regional business manager who will support Royal's distribution network and end-user customer base throughout Ohio, Kentucky, Western Pennsylvania, and West Virginia.   

Automated Parts Accumulator

Increase Throughput with Off-the-Shelf Automation
This automated parts accumulator is designed to complement any bar-fed CNC lathe, providing hours of profitable, unattended operation by safely collecting and organizing finished parts.

Video: Parts Accumulator Allows for Unattended Machining
One of the advantages of a Swiss-type lathe is that once you’ve set up the bar feeder, you’re good to go until you run out of barstock. This accumulator simplifies the other end of the operation.

Collet Chuck Essentials
“Understanding CNC Collet Chucks” has been one of the most read articles in our archives during the past several years and continues to get substantial traffic today.

Improve the Shopfloor Environment
Any form of pollution in the shop environment is potentially dangerous to personnel.

Mist and Smoke Collectors for Metalworking Applications
While many companies are aware of the traditional problems associated with oil mist, few are aware that failure to adequately address mist and smoke issues often results in reduced productivity and increased machine downtime.

The Many Sides of Workholding
Here's a broad look at different ways to approach workholding based upon the requirements of the application.

Royal Bar Puller

CNC Bar Pullers
CNC bar pullers can provide an inexpensive means of automating any CNC lathe.

Royal Products Rota-Rack Parts Accumulator

Rotary Parts Accumulator
This rotary collection device allows safe parts accumulation from untended bar-fed lathes. It is programmed to index with each part produced, collecting parts without allowing them to collide with one another.

Product Categories of Royal Products

Actuators, Hydraulic & Pneumatic
All Other Workpiece Handling, Loading & Feeding Equipment not specified
Arbors (for Cutters)
Arbors, Expandable Workholding
Bar Feed Mechanisms
Centers, Live & Other
Chamfering Tools
Chuck Jaws & Collets
Chucks, Collet Type (for Workholding)
Chucks, Gear
Chucks, Jaw Type
Chucks, Power
Chucks, Precision
Chucks, Self-Contained
Chucks, Special
Clamps & Fixturing Devices
CNC Attachments
Collets for Workholding
Collets, Solid & Master
Conveyors & Other Part Handling Automation
Counterbores/Countersinks
Cut-Off Tools/Attachments
Deburring Equipment
Deburring Machines
Deburring Tools (Machine Tool Spindle-Mounted)
Drill Chucks
Drilling Attachments
Dust Collectors & Air Filtration
Environmental & Pollution Control Equipment
Fixturing Systems
Gantry Loaders
Grinding Attachments & Accessories
Lighting Equipment
Machinery Mountings, Levels, Anchors, Dampers
Mandrels
Milling Heads/Attachments
Pick-off Attachments
Pumps, Coolant
Robot Tooling/Grippers
Toolholders
Tooling Systems, Modular and/or Quick-Change
Turning Attachments
Vises & Vise Jaws
Workholding, Custom

Trade Names

Albrecht
APC
Easychange
Filtermist
Grippex
Noga
PMS
Rota-Rack
Royal
Royal Filtermist
Royal Products
Spindle Type
Super Quad
Tuff-Pro
Value-Turn
Versa Turn
Zip Burr