4/18/2011

90-Degree Pocketing Aluminum - 0.250” DOC with Square Shoulder End Mill and XPET-ALU Inserts from Dapra

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

(sponsored content) This video demonstrates Dapra's 1" Square Shoulder End Mill executing a pocketing routine in aluminum.

Loading the player ...


Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

This video demonstrates Dapra's 1" Square Shoulder End Mill executing a pocketing routine in aluminum. The material is 6061 aluminum, and the machine tool used is a Fadal 4020 with a 40-taper spindle. 
 
This particular pocketing routine utilizes a polished, 16mm XPET-ALU insert for more depth of cut capability at an aggressive feed rate.  The MRR (metal removal rate) for the cut is 60 cubic inches/minute. The cut shown is done without coolant in order to provide better visibility. Good coolant flow is generally recommended. 
 
The parameters for this video are:
1" Square Shoulder End Mill
XPET1604-ALU Inserts
6061 Material
2000 SFM (7640 RPM)
.026" IPT (400 IPM)
.250" DOC
.600" WOC
40 Taper VMC

Hand holding a crystal ball

We’d rather send you $15 than rely on our crystal ball…

It’s Capital Spending Survey season and the manufacturing industry is counting on you to participate! Odds are that you received our 5-minute Metalworking survey from Production Machining in your mail or email. Fill it out and we’ll email you $15 to exchange for your choice of gift card or charitable donation. Are you in the U.S. and not sure you received the survey? Contact us to access it.

Help us inform the industry and everybody benefits.

RELATED CONTENT

  • The Forgotten Art Of Skiving

    Here's a look at one of the oldest and most efficient methods of screw machine production for parts that are long and slender, with close-diameter tolerances and finishes, or parts that require truly spherical radii.

  • Broaching On A Lathe

    Producing a keyway, spline or similar longitudinal feature on a turned part usually necessitates an additional, time-consuming, secondary operation on a broaching or slotting machine. That means moving the part to and from a secondary operation, an extra setup, additional labor and hourly machine costs and all of the other headaches that go with secondary operations.

  • A Guide to Insert Coating Processes and Materials

    Few materials have had a greater impact on our economy and industrialized culture than cemented tungsten carbide.


Resources