Milling Tools

Exploring the: Milling Tools Zone

36 Results for: Product

Sort by:
Published: 7/23/2020

Electric Spindle System Offers Full Tool Changeability
NSK America’s i-Speed 5 utilizes multiple spindles with independent rpm settings.

Published: 3/26/2020

Xtra·tec XT M5008 Indexable High-Feed Milling Cutter
High-feed milling cutter in the diameter range of 5/8–2" permits high feed per tooth at low axial depths of cut. 

Published: 1/20/2020

MC232 Perform Line of Solid Carbide Milling Cutters
The cutters have a corner radius for improved approaches, longer tool life, and greater edge stability.

Published: 12/23/2019

Big Kaiser Expands BBT30 Toolholder Offering
Big Kaiser has added inch standard sizes for the U.S. market to the production of its Big-Plus BBT30 basic arbors (shell mill holders, end mill holders, shrink fit and blanks).

Published: 12/8/2019

Inovatools’ VHM-Deepmax Drills Without Chip Removal Up to 30×D
Deepmax drills have a tool life of 75 m with normal wear. They are made 15×D, 20×D, 25×D (all up to 12-mm diameter) and 30×D (up to 10 mm diameter).

Published: 12/5/2019

Tungaloy's ETTL Insert Improves Efficiency for Parallel Thread Milling
Thread milling provides a high level of security thanks to the light cutting load generated when the tool breaks the chip in smaller pieces, preventing the chip from being jammed, which typically occurs during tapping.

Published: 12/4/2019

Dormer Pramet Expands its Line of Milling Tools for Die and Mold
A strong main cutting edge is said to enable a high durability and process security, especially when machining corners inside a pocket. 

Published: 10/17/2019

Big Kaiser Moves Production of CAT50 Smart Damper for Milling to U.S., Expands Offering
The Smart Damper is a damping system that eliminates vibration to enable fine surface finishing and higher metal removal rates.

Published: 10/16/2019

Seco Niagara Cutter 5-Flute End Mill Delivers Versatility
The Seco Niagara Cutter Stabilizer product family has expanded to include the ST540 five-flute end mill.

Published: 8/23/2019

Big Kaiser's Stainless Steel and Aluminum Insert Grades for Milling and Chamfering
Big Kaiser’s set of insert grades for its indexable tools—C-Cutter Mini, C-Centering Cutter and Fullcut Mill—are optimized to extend tool life in stainless steel or aluminum.