Screw Machines - Single-Spindle

Exploring the: Screw Machines - Single-Spindle Zone

51 Results for: New Product

Sort by:
Published: 2/27/2017

Screw Machine Clutch Promotes Consistent, Repeatable Cycle Times
Logan’s air threading clutches, Hi-Lo retrokits and XT controls are said to increase productivy on Acme, New Britain and Davenport machines.

Published: 2/27/2017

Screw Machine Has Four Cross Slides
Absolute Machine Tools will demonstrate one of Lico’s LNTS line of multi-slide screw machines featuring a 42-mm spindle with four cross slides, an eight-position backworking electric turret and the ability to overlap as many as five tools at o...

Published: 2/27/2017

Shaft Unloading Via Second Lathe Spindle
Lexair Inc., North American importer for German lathe automation provider, Breuning Irco, offers expanded capabilities to enable fast part and shaft unloading via a CNC lathe’s second spindle.

Published: 2/24/2017

Deburring and Burnishing Tools for Swiss-Type and Other Lathes
Cogsdill Tool Products Inc. will display a variety of deburring and burnishing tools designed for production machining on Swiss-type and other machines.

Published: 2/24/2017

Hydrodynamic Bar Feeder for Large Quantities of Barstock
CNC Indexing & Feeding Technologies’ Tracer Minibar hydrodynamic magazine bar feeder is able to feed bar diameters from 0.8 mm to 12 mm and up to 10 ft. in length.

Published: 2/24/2017

Cams for Optimum Screw Machine Performance
Champion Screw Machine provides the actuation cams that are essential for optimum machine performance.

Published: 3/13/2015

Bar, Chucking Machine Offers High Accuracy Part Finish
Bar, Chucking Machine Offers High Accuracy, Part Finish Hardinge Inc. offers its Conquest H51 bar and chucking machine featuring the company’s quick-change Collet-Ready spindle.

Published: 7/9/2012

32-mm Swiss-Type Converts to Chucker
Available from REM Sales, the latest model in Tsugami’s B0 Series of Swiss-type lathes is the B0326, a 6-axis, 32-mm machine featuring a chucker kit that enables users to operate without a guide bushing or bar feeder.

Published: 3/2/2011

CNC Swiss-Type with Triple Turret
The ST-38 CNC Swiss-type automatic lathe, with its triple turret design, enables more capability for machining components for the medical, automotive and aviation industries.

Published: 2/25/2011

Variety of Lathes, Turning Centers on Display
The company will display four Swiss-type lathes and three turning centers.