FDA Releases Draft Guidance for Additive Manufacturing of Medical Devices
Even if additive manufacturing and medical devices are not yet on your radar, this information may be useful in strategic planning for cleaning complex parts.
#additive
Share
Readers of Production Machining will benefit from reviewing and commenting on the new FDA draft guidance document about additive manufacturing (AM) for medical devices. Not concerned about medical devices? Not even thinking about AM? Read the document anyway, because the wave of AM impacts not only medical devices but also automotive, aerospace products and consumer products.
The document, “FDA’s initial thinking on technical considerations specific to devices using additive manufacturing, the broad category of manufacturing encompassing 3-dimensional (3D) printing,” (1) includes items from a 2015 FDA workshop on AM for medical devices. The document contains a range of aspects of design, printing, and processing. Our area of specialization is critical cleaning and surface quality; and as invited participants to the workshop at FDA headquarters we addressed challenges with cleaning AM devices. As indicated in Section VI(E), of the draft guidance, cleaning processes can be more difficult in AM devices than with those produced by traditional (non-additive) means.
The benefits of AM may result in cleaning challenges. The layer-by-layer process of AM allows complex internal support structures and tortuous internal channels; the result can be a product with desirable features. In addition, products are becoming more complex, including instances where, in post-printing operations, AM is combined with traditional manufacturing processes. This means that particles (including residue of powder from the printing process) and/or metalworking fluids can become entrapped. Manufacturers have to design and demonstrate effective cleaning processes.
To assure that the FDA considers comments before it begins work on the final version of the guidance, they request that comments be submitted by August 8, 2016. (2)
2. Federal Register announcement.
RELATED CONTENT
-
Tooling Up for Micromachining
Choosing the right tools and matching them to the correct operations and process techniques for micromachining applications is critical to success in this burgeoning market.
-
Rotary Broaching 101
There continues to be new ways of driving fasteners into the materials they are intended to hold together.
-
Vegetable Oil Improves Machining Of Medical Devices
Production management at this shop speculated that many of the materials used and operations performed might benefit from the higher level of lubricity characteristic of vegetable oils. Any consequent additional capacity and tool life would be a plus.
