Filtration Systems Ensure a Continuous Clean-Oil Supply
Appears in Print as: 'Systems Ensure a Continuous Clean-Oil Supply'
Vomat fine filtration systems filter to NAS 7 (3-5 microns), operate in full-flow mode and separate dirty and clean oil while the system filters and cleans the machine, meaning that the backflush cycle is initiated automatically for each individual filter element.
#metalworkingfluids
Vomat fine filtration systems filter to NAS 7 (3-5 microns), operate in full-flow mode and separate dirty and clean oil. At the same time, the system filters and cleans the machine. This means that the backflush cycle is initiated automatically for each individual filter element, depending on need.
The other filter elements are said to ensure a continuous clean-oil supply to the workpiece while the soiled filter element is cleaned. In addition, the wear and tear of the grinding wheel is reduced when clean coolants are being used during tool grinding. As a result, fewer abrasive particles are circulated in the coolant and the grinding tools last longer.
The micro filtration systems are available in sizes from 70 to 960 liters/minute (18 to 254 gallons/minute) filter capacity and with add-on modules can be tailored to different plant configurations.
RELATED CONTENT
-
The Science Of High-Pressure Coolant
High-pressure coolant is the new 'hot' technology, with approximately a 500 percent increase in use in the last 10 years.
-
A Guide to Metalworking Fluids
The oils, coolants and lubricants used in metalworking shops are often overlooked as an opportunity to improve process efficiencies.
-
Metalworking Fluid Management and Best Practices
Cutting metal is a complex process involving many critical factors to be successful. Correctly applied metalworking fluids, including oils or coolant, is one of these critical factors.