4/24/2018

Hardinge Webinar Focuses on Achieving Turning Tolerances

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Bill Clark, an application engineer with Hardinge, spoke about turning tolerance requirements during a webinar on April 25. Listen to the recording, if you missed the live webinar.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

 

Hardinge logo

 

Shops that want to meet tolerance requirements for part prints may be forced to change from traditional turning operations to complicated and expensive processes. Profile tolerance capability, roundness and cylindricity capability, small step test results and machine rigidity and design requirements to achieve precision are all topics that can benefit shops looking to make this change.

Bill Clark, an application engineer with Hardinge who has been with the company for more than 30 years, spoke about these subjects during a webinar on April 25.

If you missed the live webinar, listen to a recording of it here. You will need to register first, and then the recording will instantly play.


Resources