Tooling
| 1 MINUTE READ

PowRgrip Clamping System Ensures Long Tool Life

Rego-Fix’s PowRgrip clamping system is comprised of PG toolholders and clamping collets for use in a manual or automatic mini-press that may match or exceed the clamping forces of shrink-fit holders.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Rego-Fix’s PowRgrip clamping solution is comprised of PG toolholders and clamping collets for use in a manual or automatic mini-press. These toolholders and collets are said to match or exceed the clamping forces of shrink-fit holders.

The heat-free clamping process can be completed in less than 10 seconds and offers low runout and vibration dampening in addition to long tool life as compared to shrink-fit and hydro-chuck systems.

RELATED CONTENT

  • Broaching On A Lathe

    Producing a keyway, spline or similar longitudinal feature on a turned part usually necessitates an additional, time-consuming, secondary operation on a broaching or slotting machine. That means moving the part to and from a secondary operation, an extra setup, additional labor and hourly machine costs and all of the other headaches that go with secondary operations.

  • Skiving Long, Slender Parts with Tight Tolerances

    Here's a look at one of the oldest and most efficient methods of screw machine production for parts that are long and slender, with close-diameter tolerances and finishes, or parts that require truly spherical radii.

  • The Fundamentals of Chip Control

    Having strategies in place for managing chips is an important part of protecting the production process, from tool life to product quality.