Coolant Systems Offer Alternative to Edge-Type Filtration
Appears in Print as: 'Systems Offer Alternative to Edge-Type Filtration'
Eriez HydroFlow’s Coolant SuperFiltration systems remove particles down to 3-micron nominal from cutting fluid while maintaining a stable fluid temperature and offer an alternative to edge-type filtration in oil applications.
#metalworkingfluids
Share
Eriez HydroFlow’s Coolant SuperFiltration systems remove particles down to 3-micron nominal from cutting fluid while maintaining a stable fluid temperature. The systems offer an alternative to edge-type filtration in oil applications. According to the company, the most common applications involve parts surface finishing, where tolerances and roughness must be strictly controlled to protect product quality.
The systems are mainly connected with grinders, sharpening, lapping and honing machines. They can also be applied to automatic lathe units to filter oil recovered from chips centrifugation, from the periodic emptying of the tanks and for the oil used at high pressure for the drilling process, the company says.
Customers can use PCs, tablets or smartphones to remotely monitor, manage and adjust their SuperFiltration system to match a machine tool's daily working conditions.
RELATED CONTENT
-
The Real Cost of Metalworking Lubricant
Lubrication in the cutting process is often an afterthought, but its cost justifies far more attention. Here’s a look at how a shop can determine the true impact on the bottom line.
-
A Guide to Metalworking Fluids
The oils, coolants and lubricants used in metalworking shops are often overlooked as an opportunity to improve process efficiencies.
-
Metalworking Fluid Management and Best Practices
Cutting metal is a complex process involving many critical factors to be successful. Correctly applied metalworking fluids, including oils or coolant, is one of these critical factors.
