Mitutoyo Measurement System Provides Highly Accurate Readings
Eastec 2023: The LH-600F Linear Height Measurement System features a high-accuracy scale unit and guiding mechanism.
Share
Mitutoyo America Corp.’s LH-600F Linear Height Measurement System is the latest model in the Mitutoyo Linear Height Gage line. It has several new features, including a high-accuracy scale unit and guiding mechanism.
The LH-600F now features a touchscreen interface that is designed for easy and intuitive operation, enabling users to measure with the press of a button or through touchscreen icons. The rotatable and adjustable display of the LH-600F also enables use from both front and rear orientations. There are also new output options, including a Digimatic output that enables data to be sent directly to Excel or statistical process control (SPC) software, wired or wirelessly, while maintaining USB and RS232C output capabilities.
It also has a new self-check feature that can detect dirt or oil on the encoder, ensuring the instrument is clean and able to provide accurate measurements. The system can make instant changes to units, resolution and delta measurement from the previous reading, while an air bearing system makes it easy to move the height gage around.
The LH-600F has motorized capabilities that provide better repeatability and reproducibility, as well as an improved 2D mode to measure angles, bolt hole circles and more. A new optional foot switch enables hands-free repeat measuring of volume parts. Multiple probe options and switchable probe positions enable better perpendicularity and straightness measurements.
The LH-600F is said to provide excellent accuracy of 1.1+0.6L/600 micron with 0.1 m/0.5 m resolution/repeatability. It is available in both imperial and metric models.
Look for these and other measurement options at Booth 3111 at Eastec 2023.
RELATED CONTENT
-
BYK-Gardner Gages Feature Multiple Measurement Modes
BYKO-test 9500 series of dry-film thickness gages have functions to store, archive and document measured values, easily change device settings on a PC and pre-configure by setting pass/fail limits.
-
Zeiss Software Increases 3D Measurement Data Compatibility
Zeiss has launched Zeiss Inspect, a system-independent data evaluation for optical and CT measurement data.
-
Digilog Probe for In-Process Surface Roughness Measurement
Caron Engineering’s DTect-IT CNC sensor analysis system uses the Blum-Novotest TC64 RG Digilog Probe as the sensor input for in-process surface roughness analysis.
