4/13/2010 | 1 MINUTE READ

Small Parts Have Big Impact

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Advanced micromachining capabilities have had a monumental effect on the way parts are produced. But as parts continue to get smaller, complexities increase, as do corresponding tolerance requirements.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

We’ve seen some remarkably small technological breakthroughs in recent years—small in terms of physical size, but certainly not impact. One of the more noticeable fields where this trend comes into play is electronics, with smaller yet far more sophisticated computers, phones and other communications tools. But advancements in other areas, such as medical and aerospace applications, are no less important or impressive. Advanced micromachining capabilities have had a monumental effect on the way parts are produced.

But as parts continue to get smaller, complexities increase, as do corresponding tolerance requirements. Even the slightest discrepancies can make a big difference when dealing in diameters less than 5 thousandths of an inch. So being able to measure such parts to verify their precision becomes a serious concern as well. Generally speaking, successful micromachining requires the right combination of machine tool, tooling, workholding and measurement.

A legitimate method for checking micromachined parts is through the use of an inspection system such as the OASIS. This optical profile inspection system, offered by George Products Company Inc., allows non-contact measurement accuracies to ±0.0001". It offers simultaneous measure of multiple dimensions, with continuous image acquisition for instant measurements.

In the article “Micro Measuring,” we take a look at an Ohio shop that specializes in micromachining for aerospace, fluid power and medical/dental applications. See how this company handles the ever-growing challenges presented by its customers, including particle counting via microscope for a fuel injector customer.

For more information about the many concerns of micro-machining, including videos and in-depth articles as well as product descriptions and a list of suppliers for all aspects of this manufacturing niche, visit PM’s Micromachining Zone.

RELATED CONTENT

  • To Scan or Not to Scan

    Industrial metrology professionals are constantly tasked with finding the best methodology to inspect parts.

  • Reducing Downtime With Tool Presetting

    It’s an ongoing challenge. To remain competitive, shops must find new and more efficient ways to increase production. Often they look to new, faster and more precise machine tools as the answer. Sometimes experimentation with a variety of different tooling

  • Keeping Watch on Small Parts

    From watch parts to exotic medical applications, this shop takes on the world of micromachining.


Resources