Zeiss' CMM Shortens Setup Time, Minimizes Downtime
5/9/2023Eastec 2023: The O-Inspect multisensor CMM provides flexibility in handling a wide variety of part sizes and small characteristics.
Dillon's Extruded Aluminum Pie Jaws Maximize Contact Area
5/8/2023Eastec 2023: The company’s full-grip pie jaws are machined from aluminum barstock, meaning they have none of the porosity inherent with castings.
CGTech Simulation Software Optimizes Machining Operations
5/5/2023Eastec 2023: Vericut software detects errors and potential collisions in NC programs prior to running them on machines for the first time, thereby enabling programmers to send programs to a machine with the confidence it will run without incident.
Ceratizit's Control System Increases Process Security
5/4/2023Eastec 2023: The ToolScope monitoring and control system can reduce cycle times up to 15% and, with wear monitoring, optimize tool life and provide additional tool reserve usage up to 30%.
NSK America Spindle System Supports Lights-Out Manufacturing
5/2/2023Eastec 2023: The iSpeed5 electric, high-speed motor/spindle uses a specially designed connection that can withstand coolant, chips, dust and other machining debris from contaminating the stop block.
Cosen Band Saws With Manual, Vertical Tilt-Frame
5/1/2023Eastec 2023: The V-1822 Tilt-Frame Band Saw features a manual design and enables miter cuts ranging from 0 to 60 degrees in both directions.
Paperless Parts Quoting Platform Streamlines Estimating Process
4/28/2023Eastec 2023: Recent updates to Paperless Parts include performance enhancements to the 3D Part Viewer that improve the ability to navigate complex parts and assemblies.
Coolant-Through System, Toolholders for Improved Efficiencies
4/27/2023Eastec 2023: The reCool retrofittable reCool coolant-through system converts existing flood-cooled driven tools on turning machines to through-tool, coolant-capable in as little as two minutes, while the powRgrip high-precision toolholding system is said to generate extremely high clamping forces equal to or higher than shrink-fit holders.
SMW Autoblok's Workholding System Removes Obstacles
4/26/2023Eastec 2023: MillTec makes it is easier to carry out complex operations with five-sided access to the part.
Haimer Products Enhance Shrink-fit Toolholding
4/25/2023Eastec 2023: The Power Clamp Air i4.0 and the Nano NG i4.0 are specially designed for the shrink-fit process.