NEW PRODUCTS

This list is a comprehensive collection of product announcements provided by companies. You may search for specific product information or browse to stay updated.

You are viewing products related to: Screw Machines - Single-Spindle

PUBLISHED: 9/23/2005

High Speed Automatic Turning

The Sprint 65 linear offers advantages for the bar machining of workpiece diameters up to 65 mm as well as for chuck workpiece diameters up to 175 mm, the company says. The machines are designed with linear drives in the X3 axis, Y axis in the stan...


PUBLISHED: 9/1/2005

Coated Heads Show Zero Wear

The New Davenport coated head shows zero wear after producing one million parts in a test run on a customer's machines, the company says. Now, the same extended wear life found on the HP revolving head is available on standard 8-SA heads with stand...


PUBLISHED: 8/25/2005

Dual Spindle Gang Tool Lathe

New from Miyano, the BX-26S gang tool lathe with two spindles offers complete part machining of complex bar work (1" diameter and under) in a single setup. Two gang slides and a 3D linear turret further contributes to the lathe's precision and fast...


PUBLISHED: 8/8/2005

Toolholder For Multi-Spindle Automatics

Goeltenbodt (GWS) introduces a toolholder with a Capto interface for multi-spindle automatics. The coolant is guided through the toolholder to the tools cutting edge for longer tool life. The maximum permissible coolant pressure is rated at 500 ps...


PUBLISHED: 8/2/2005

Single-Spindle CNC Bar Machine

The C65 CNC Single Spindle Bar Machine features a counterspindle and Y axis for extended machining flexibility and increased speed. With optional 42-mm (1 5/8inch), or 65-mm (2 ½”) bar capacity, a maximum spindle speed of 6,300 rpm, respectively 5...


PUBLISHED: 4/25/2005

Small Turning Lathes

The ZV CNC gang tool lathe joins a family of gang tool machines from 27 mm to 60 mm along with a group of CNC Swiss CNC lathes. According to the company, the vertical design offers easier operation interface and facilitates tooling setups, and chang...


PUBLISHED: 4/5/2005

Lathe With C-Axis

SNK's Prodigy GT-27 gang tool lathe features C-axis spindle, a polymer base and precision components for fast and accurate small parts turning. The lathe uses three axes of motion that can be commanded in absolute or incremental modes. The C-axis...


PUBLISHED: 4/1/2005

Full CNC System For Brown & Sharpe

The ServoCamUltraTurn system provides full CNC control of the spindle and all tool slides, virtually eliminating the need to change cams or gears. Systems are available for all #2 or #3 Ultramatics, including standard and Ram-Slide Ultramatics, CNC...


PUBLISHED: 3/11/2005

Single-Spindle CNC Machining

This single-spindle CNC offers single-point threading, spindle indexing, rigid tapping, fully CNC controlled with Mitsubishi technology. It has an eight-station turret with indexing less than 1 second. The spindle offers infinitely variable speeds...


PUBLISHED: 3/10/2005

Turning Center With CNC Accuracy

Ergomat's lines of TBA and TDA machines introduce CNC accuracy, speed and ease to the multiple slide design. This union results in machines capable of fast production, but with CNC setup and operation. The TBC line is a turning center with a spind...


RSS RSS  |  Atom Atom